Check Grab Handle On Roof - AR68.30-P-4330-01FR

Model 167.1/9 

Model 206, 254 

Model 223 

Model 257 

1. Push grab handle (1) to joining direction at clips with both hands (arrows).

   Courtesy of MERCEDES-BENZ USA

2. Completely fold out grab handle (1), pull downward and check whether it is seated tightly at both mounting points.

   Courtesy of MERCEDES-BENZ USA

3. Push grab handle (1) to joining direction at clips with both hands (arrows).

   It must be ensured that the grab handle (1) is seated tightly.

   A clip not engaged can pose an injury risks when entering or exiting the vehicle.

   If a clip has become loose during the tensile test,

   ↓

   Check clip, if necessary replace and repeat test.

Courtesy of MERCEDES-BENZ USA