Remove/Install 3rd Seat Row Rear Seat - AR91.12-P-0007ME

Model 167.1 

With Code 847 (3rd seat row) 

Courtesy of MERCEDES-BENZ USA

Courtesy of MERCEDES-BENZ USA

	Risk of injury  caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.	No parts of the body or limbs should be within the operating area when the components are moving.	AS00.00-Z-0011-01A
	Risk of injury  . Moving parts can pinch, crush or, in extreme cases even sever extremities.	No parts of the body or limbs should be within the operating area of mechanical components when moving components.	AS00.00-Z-0009-01A
Topical note	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Notes on HANDS-FREE ACCESS		AH80.61-P-0001-01A
	Remove/install
1	Move rear seats of 2nd seat row to EASY-ENTRY position.
2	Remove luggage compartment cover.	Model 167.1 with code 723 (Load compartment cover) with code 847 (3rd seat row)
3	Remove covers (2).
4	Remove screw/bolts (3).	Screw, seat frame base for 3rd seat row to body	*BA91.12-P-1016-03M
5	Remove partitioning net in load compartment.	Model 167.1 with code 847 (3rd seat row) with code U40 (Safety net for luggage cover)
6	Fold over seat backrests of 3rd seat row rear seat (1).
7	Fold up and remove front loading floor cover.
8	Remove rear load compartment floor.
9	Remove screws/bolts (4).	Screw, seat frame base for 3rd seat row to body	*BA91.12-P-1016-03M
10	Release and disconnect electrical connect	The number of electrical connectors varies according to the vehicle equipment.
11	Remove 3rd seat row rear seat (1).	When removing the 3rd seat row rear seats (1), do not touch any trim parts in the vehicle interior. Otherwise they may be damaged. Aid of helper required.
12	Install in the reverse order.

REAR SEATS

Number	Designation			Model 167
BA91.12-P-1016-03M	Screw, seat frame base for 3rd seat row to body	M10	Nm	50