Remove/Install Roof Railing - AR77.40-P-5000ME

Model 167.1/9 

Courtesy of MERCEDES-BENZ USA

Shown on the right side of the vehicle on model 167.1 With Code 413 (panoramic sliding sunroof) and code U40 (safety net for luggage compartment cover) 

	Risk of injury  caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.	No parts of the body or limbs should be within the operating area when the components are moving.	AS00.00-Z-0011-01A
	Notes on safety-relevant components		AH00.00-Z-0019-01A
	Remove/install
1	Remove roof lining and set down on suitable base.		AR68.30-P-4300ME
2	Remove screws (1) and remove rear luggage net bracket (2).	Model 167.1 with code U40 (Safety net for luggage cover)
		Screw, mounting support for luggage net to C-pillar	*BA68.30-P-1001-01G
3	Remove nuts (3).	Nut, roof railing	*BA77.40-P-1001-01C
4	Remove nut (4) and remove roof railing.	The roof railing must be held by a helper and carefully removed. Otherwise the paint can be damaged. Replace seals at bolts.
		Nut, roof railing	*BA77.40-P-1001-01C
5	Install in the reverse order.