Prepare Body Flange For Front Fixed Element Of Panoramic Sliding Sunroof For Installation - AR77.21-P-0803-03ME

Model 167 

With Code 413 (Panoramic sliding sunroof/glass roof) 

Courtesy of MERCEDES-BENZ USA

Shown on 167.1 With Code 413 (Panoramic sliding sunroof/glass roof) 

Shown on 167.3 With Code 413 (Panoramic sliding sunroof/glass roof) 

Courtesy of MERCEDES-BENZ USA

1. Cut adhesive beads (1) down to a height of approx. 1 to 2 mm using scraper.
2. Remove cutting residues from body flange (2).
3. Clean residual glue bead with the cleaner.

   The cleaner is included in the repair kit.

4. Repair paint damage.

   Use only primer filler approved by Daimler AG: https://xentryportaLi.daimler.com

5. Apply primer in gluing area if glue residues are not present.

   Only use the repair kit approved by the manufacturer from the replacement part system. Otherwise, adhesion problems will occur. 

   Apply primer only after primer has dried. Otherwise the strength of the adhesive connection can be impaired and proper adhesion of the adhesive material is not ensured.

   The primer is included in the repair kit.