Specified Anti-Corrosion Protection/Antifreeze (CV) - Overview - BB00.40-P-0320-02A
Model all (Heavy transporter)
| Coolant specifications | BB00.40-P-0310-01A |
| Prescribed specification for service fill anti-corrosion agents/antifreeze, coolant Commercial vehicle engines - Mercedes-Benz | |||||
|---|---|---|---|---|---|
| MB Specifications for Operating Fluids, sheet | 312 | 325, 326 | |||
| 0 | 0 | 3 | 5 | ||
| Major assembly Model series without secondary water retarder (SWR) | OM 300 | • | • | • | • |
| OM 400 | • | • | • | • | |
| OM 904 - 926 | • | • | • | • | |
| OM 934, 936 | - | - | - | • | |
| OM 457, 460 | • | • | • | • | |
| OM 500 | • | • | • | • | |
| OM 470 - 473 | - | - | - | • | |
| Major assembly Model series with secondary water retarder (SWR) | - | - | - | • | |
| Prescribed specification for service fill anti-corrosion agents/antifreeze Car engines in commercial vehicles - Minibus | |
|---|---|
| MB Specifications for Operating Fluids, sheet | 325, 326 |
| 6 | |
| OM 651 in Model s 907, 910 | • |
| OM 654 in Model s 907, 910 | • |
NOTE:
As a general rule, the approved anti-corrosion agents/antifreeze (MB sheet) can be found in the respective operator's manual for the vehicle. This table contains only the anti-corrosion agent/antifreeze for engines that have been produced in the last 15 years.
Information on unlisted or older engine types can be found in the service/maintenance instructions or requested from the Mercedes-Benz Classic Center.
Information on unlisted or older engine types can be found in the service/maintenance instructions or requested from the Mercedes-Benz Classic Center.
Before use in the vehicle, ensure that the target concentration and the water quality satisfy the requirements of MB sheet 310.1.
• Approval
- May not be used.