Remove/Install Front Axle Brake Hose - AR42.10-P-0026MEX
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2025 Mercedes-Benz Maybach GLS600, 2025 Mercedes-Benz GLS63 AMG, 2024 Mercedes-Benz Maybach GLS600, 2024 Mercedes-Benz GLS63 AMG, and 2023 Mercedes-Benz Maybach GLS600. However, it is still accessible from the selected car via links, so may be relevant.
Model 167
with code B06 (Silver brake calipers)
Model 167
with code B07 (AMG - ceramic brake system)
Model 167
with code U29 (AMG high-performance braking system)
Model 167
with code U70 (red-painted brake callipers)
Fig 1: Front Axle Brake Hose Components Location - Model 167 With Code B06 ; B07; U29; U70 (Shown On Right Side Of Vehicle)
Shown on right side of vehicle
| Risk of accident when commissioning the vehicle due to a lack of braking effect when the service brake is operated for the first time after repair work. | Before starting the engine, actuate brake pedal several times until pressure is built up and maintained in the brake system. | AS42.50-Z-0002-01A | |
| Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid | Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | AS42.50-Z-0001-01A | |
| Notice | Notes on handling, transport and storage of composite brake disks | AH42.10-P-9406-12LF | |
| Notice | Notes on repairs to brake system | AH42.00-P-0003-01A | |
| Notice | Notes on installing brake hoses | AH42.10-P-9406-01A | |
| Notice | Brake fluid notes | AH42.50-P-0001-01A | |
| Notes on safety-relevant components | AH00.00-Z-0019-01A | ||
| Remove/install | |||
| 1 | Remove left or right front wheel and tire assembly. | AR40.10-P-1102ME | |
| 2 | Clean area around connecting points between brake lines (1, 5) and brake hose (4). | Assembly cleaner | *BR00.45-Z-1028-04A |
| 3 | Unscrew retaining screw (2) of brake line (1) from brake hose (4) and disconnect brake hose (4). | ||
| Note on calculation of tightening torque when using insertion or socket tools with various effective lengths | AH00.00-P-0015-01CW | ||
Seal connections immediately. Otherwise damage can be caused by escaping brake fluid. |
|||
| *BA42.10-P-1002-04J | |||
| Fig 2 | |||
| Fig 4 | |||
| 4 | Open brackets (8) and expose brake hose (4). | ||
| 5 | Unscrew retaining screw (6) of brake line (5) from brake hose (4), disconnect brake hose (4) and remove. | Seal connections immediately. Otherwise damage can be caused by escaping brake fluid. |
|
| *BA42.10-P-1002-04J | |||
| Fig 3 | |||
| Fig 4 | |||
| Check | |||
| 6 | Check clamps (3, 7) for damage. | If there is a problem, ↓ replace clamps (3, 7). |
|
| 7 | Install in the reverse order. | ||
| 8 | Bleed brake system. | AR42.10-P-0010ME |
BRAKE LINES, BRAKE HOSES
| Number | Designation | Model 167 | |
|---|---|---|---|
| BA42.10-P-1002-04J | Brake line to brake hose | Nm | 14 |
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1028-04A | Assembly cleaner | A 000 986 56 01 |