Remove/Install Front Axle Brake Disk - AR42.10-P-0230MEA
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2025 Mercedes-Benz Maybach GLS600, 2025 Mercedes-Benz GLS63 AMG, 2024 Mercedes-Benz Maybach GLS600, 2024 Mercedes-Benz GLS63 AMG, and 2023 Mercedes-Benz Maybach GLS600. However, it is still accessible from the selected car via links, so may be relevant.
Model 167
with code B06 (Silver brake calipers)
Model 167
with code B07 (AMG - ceramic brake system)
Model 167
with code U29 (AMG high-performance braking system)
Model 167
with code U70 (red-painted brake callipers)
Shown on right side of vehicle
| Risk of injury . Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| Notice | Notes on handling, transport and storage of composite brake disks | AH42.10-P-9406-12LF | |
| Notice | Notes on repairs to brake system | AH42.00-P-0003-01A | |
| Notice | Notes on self-locking nuts and bolts | AH00.00-P-0001-01KOA | |
| Notice | Notes on handling, transport and storage of ceramic brake disks | AH42.10-P-9406-13A | |
| Notes on safety-relevant components | AH00.00-Z-0019-01A | ||
| Remove | |||
| 1 | Remove corresponding brake caliper with brake linings and secure to vehicle free of tension with lines attached. | AR42.10-P-0070MEX | |
| 2 | Unscrew safety screw (2) and remove brake disk (1). | ||
| Check | |||
| 3.1 | Check brake disk (1) for condition and wear. | Model 167 with code B07 (AMG - ceramic brake system) | |
| AR42.10-P-0270RG | |||
If there is a problem, ↓ replace corresponding brake disk (1). |
|||
| 3.2 | Check brake disk (1) for condition and wear. | Model 167 with code B06 (Silver brake calipers) Model 167 with code B07 (AMG - ceramic brake system) Model 167 with code U29 (AMG high-performance braking system) |
|
If there is a problem, ↓ replace brake disks (1). |
AP42.10-P-4256EW | ||
| Clean | |||
| 4 | Clean contact surface and interference fit of brake disk (1). | Do not use sharp-edged or pointed objects. Otherwise, the contact surface and interference fit could be damaged. |
|
| Assembly cleaner | *BR00.45-Z-1028-04A | ||
| Install | |||
| 5 | Lightly grease interference fit of brake disk (1) | Paste, hot lubrication 1 kg, DBL 6879.20 | *BR00.45-Z-1005-06A |
| 6 | Position brake disk (1) using guide pins (3) and screw in safety screw (2). | ||
| *BA42.10-P-1001-11A | |||
| 7 | Install brake caliper with brake linings. | AR42.10-P-0070MEX |
FRONT AXLE BRAKE DISKS
| Number | Designation | Model 167 | |
|---|---|---|---|
| BA42.10-P-1001-11A | Safety screw, brake disk to front axle | Nm | 10 |
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1005-06A | Paste, hot lubrication 1 kg, DBL 6879.20 | A 000 989 76 51 |
| BR00.45-Z-1028-04A | Assembly cleaner | A 000 986 56 01 |