000 588 07 80 00 Flat Beam Vehicle Lift - WS00.00-P-0043B

WARNING: This page is about a different car, the 2020 Mercedes-Benz SLC43 AMG, 2019 Mercedes-Benz SLC43 AMG, 2018 Mercedes-Benz SLC43 AMG, and 2017 Mercedes-Benz SLC43 AMG. However, it is still accessible from the selected car via links, so may be relevant.

MODEL All (4xWD, CAR)

Use in FG 00/Set B

Purpose:

Vehicle lift flat beams for lifting vehicles with two parallel longitudinal members and two variable mounting plates each.

Procurement information:

Recommended workshop equipment and information about the manufacturers can be found in the WS document (see below).

Courtesy of MERCEDES-BENZ USA

NOTE: Limited use possible for smart.

Manufacturer 1:

Autop Maschinenbau GmbH

Sandkampstrasse 90

48432 Rheine

Germany

https://www.autopstenhoj.com

Type/model: Masterlift 2.35 Pv 160-220 xy
Article no.: H 13 01 01 1A

Manufacturer 2

MAHA Maschinenbau Haldenwang GmbH & Co. KG

Hoyen 20

87490 Haldenwang

Germany

http://www.maha.de

Type/model: ZS SQUARE II 3.5 FT MB
Article no.: VP 252249

Manufacturer 3:

Herrmann AG

Bahnhofstrasse 52

93483 Posing

Germany

http://www.herrmann.com

Type/model: Uni 2.35 plus
Article no.: 109612