000 589 20 99 00 Tool Kit - WS42.00-P-0029B
WARNING: This page is about a different car, the 2020 Mercedes-Benz SLC43 AMG, 2019 Mercedes-Benz SLC43 AMG, 2018 Mercedes-Benz SLC43 AMG, and 2017 Mercedes-Benz SLC43 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 447, 639, 907, 910
Model all (CAR)
| 000 589 20 99 02 Insert | Model 117, 172, 176, 204, 205, 207, 231, 246 Model 447, 639 FG 42/Set B | WS42.00-P-0029-02B | |
| 000 589 20 99 03 Insert | Model 117, 172, 176, 204, 205, 207, 231, 246 Model 447, 639 FG 42/Set B | WS42.00-P-0029-03B | |
| 000 589 20 99 04 Insert | Model 117, 172, 176, 204, 205, 207, 231, 246 Model 447, 639 FG 42/Set B | WS42.00-P-0029-04B | |
| 000 589 20 99 05 Thrust piece | Model 117, 172, 176, 204, 205, 207, 231, 246 Model 447, 639 FG 42/Set B | WS42.00-P-0029-05B | |
| 000 589 20 99 06 Thrust piece | Model 117, 172, 176, 204, 205, 207, 231, 246 Model 447, 639 FG 42/Set B | WS42.00-P-0029-06B | |
| 000 589 20 99 07 Scraping bit | Model 117, 172, 176, 204, 205, 207, 231, 246 Model 447, 639 FG 42/Set B | WS42.00-P-0029-07B |
Use in FG 42/Set B
Purpose:
Flaring tool kit for stripping and flaring the brake lines during replacement work or repairs (sectional repair).
Technical Note:
For brake lines with Ø = 4.75 mm and plastic-coated brake lines with Ø = 4.95 mm and Ø = 5.25 mm (as per DBL standard 4040.45 - Cars and 4040.47 - Vans).