Detach, Connect Front Axle Electrical Distributor Connector - AR33.10-P-0100-06V
WARNING: This page is about a different car, the 2020 Mercedes-Benz SLC43 AMG, 2019 Mercedes-Benz SLC43 AMG, 2018 Mercedes-Benz SLC43 AMG, and 2017 Mercedes-Benz SLC43 AMG. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 171, 172
MODIFICATION NOTES
| 5.3.12 | "Unclip electrical feed lines" added | Step 5 |
Right side of vehicle
- Release locking clip (1a) (arrow).
- Disconnect front axle electrical connector, right distributor (X62/6).
Shown on model 171
Left side of vehicle
- Release locking clip (1b) (arrow).
- Disconnect front axle electrical connector, left distributor (X62/7).
Shown on model 171
The right front brake wear sensor connector is at the front axle electrical connector, right distributor (X62/6).
- Unclip electrical feed lines (1) from line brackets (2) and place to one side.
Shown on model 204