Positioning Trunk Lid To Assembly Position - AR88.50-P-5000-01V
WARNING: This page is about a different car, the 2020 Mercedes-Benz SLC43 AMG, 2019 Mercedes-Benz SLC43 AMG, 2018 Mercedes-Benz SLC43 AMG, and 2017 Mercedes-Benz SLC43 AMG. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 171.4, 172.4
The trunk lid (1) can be moved to the assembly position with the Vario roof open or closed.
Shown on model 172.4
- Unclip cover (3) from trunk lid lock.
Only on model 172.4.
- Close trunk lid (1)
Shown on model 171
- Switch on ignition and actuate Vario roof actuation switch (model 171.4) or Vario roof actuation switch (model 172.4) until trunk lid (1) is completely open.
- Switch off ignition.
Shown on model 171
- Release trunk lid lock with emergency key and move trunk lid (1) to assembly position.
Attach support (2).
Do not load trunk lid (1) in assembly position, otherwise, the tubular frame and hinge levers could be damaged.
- Return trunk lid (1) to initial position in reverse order.