Checking Rear Axle Camber - AR40.20-P-0331CW
WARNING: This page is about a different car, the 2020 Mercedes-Benz SLC43 AMG, 2019 Mercedes-Benz SLC43 AMG, 2018 Mercedes-Benz SLC43 AMG, and 2017 Mercedes-Benz SLC43 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 172, 204, 207, 212, 218
MODIFICATION NOTES
| 20.06.2013 | Camber at vehicle level | BE40.20-P-1001-09AE | |
| 20.06.2013 | Permissible difference in rear axle camber between the right and left side of the vehicle | BE40.20-P-1002-09AE |
| Check | |||
| 1 | Carry out initial measurement | Model 204 | AR40.20-P-0200CW |
| Model 172, 207, 212, 218 | AR40.20-P-0200EW | ||
| 2 | Checking rear axle camber | ||
| Model 172 Rear axle camber at vehicle level | *BE40.20-P-1001-09AH | ||
| MODEL 204 Camber at vehicle level | *BE40.20-P-1001-09AC | ||
| MODEL 207Camber at vehicle level | *BE40.20-P-1001-09AE | ||
| MODEL 212Camber at vehicle level | *BE40.20-P-1001-09AD | ||
| Model 218Camber at vehicle level | *BE40.20-P-1001-09AG | ||
| Model 172 Permissible difference in rear axle camber between right and left sides of vehicle | *BE40.20-P-1002-09AH | ||
| MODEL 204 Permissible difference in rear axle camber between right and left side of vehicle | *BE40.20-P-1002-09AC | ||
| MODEL 207Permissible difference in rear axle camber between right and left side of vehicle | *BE40.20-P-1002-09AE | ||
| MODEL 212Permissible difference in rear axle camber between right and left side of vehicle | *BE40.20-P-1002-09AD | ||
| Model 218Permissible difference in rear axle camber between right and left side of vehicle If variations exist: ↓ Check the camber strut, rear axle carrier and body for deformation. | *BE40.20-P-1002-09AG | ||
| Checking accident vehicles and vehicles possibly damaged in an accident | AR40.30-P-0400CW | ||
| 3 | Carry out final measurement | Model 204 | AR40.20-P-0200CW |
| Model 172, 207, 212, 218 | AR40.20-P-0200EW |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 204.0/2 up to model refinement package, with cross strut (old version), with code 482 | Model 204.0/2 up to model refinement package, with cross strut (new version), with code 482 | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AC | Camber at vehicle level | +4.75° | ∠° | - | - |
| +3.96° | ∠° | - | - | ||
| +3.76° | ∠° | - | - | ||
| +3.52° | ∠° | -0° 43' (±30') | -0° 43' (±30') | ||
| +1.99° | ∠° | - | - | ||
| +1.98° | ∠° | - | - | ||
| +1.85° | ∠° | - | - | ||
| +1.78° | ∠° | - | - | ||
| +0.80° | ∠° | - | - | ||
| +0.69° | ∠° | - | - | ||
| +0.54° | ∠° | - | - | ||
| +0.26° | ∠° | - | - | ||
| +0.20° | ∠° | - | - | ||
| +0.07° | ∠° | - | - | ||
| -0.78° | ∠° | - | - | ||
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 204.0/2 up to model refinement package, with cross strut (old version), with code 483/486, except 4MATIC | Model 204.0/2 up to model refinement package, with cross strut (new version), with code 483/486, except 4MATIC | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AC | Camber at vehicle level | +4.75° | ∠° | - | - |
| +3.96° | ∠° | - | - | ||
| +3.76° | ∠° | - | - | ||
| +3.52° | ∠° | - | - | ||
| +1.99° | ∠° | - | - | ||
| +1.98° | ∠° | - | - | ||
| +1.85° | ∠° | - | - | ||
| +1.78° | ∠° | - | - | ||
| +0.80° | ∠° | - | - | ||
| +0.69° | ∠° | - | - | ||
| +0.54° | ∠° | - | - | ||
| +0.26° | ∠° | -1° 28' (±30') | -1° 28' (±30') | ||
| +0.20° | ∠° | - | - | ||
| +0.07° | ∠° | - | - | ||
| -0.78° | ∠° | - | - | ||
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 204.0/2 up to model refinement package, with cross strut (old version), with code 485/677, except 4MATIC | Model 204.0/2 up to model refinement package, with cross strut (new version), with code 485/677, except 4MATIC | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AC | Camber at vehicle level | +4.75° | ∠° | - | - |
| +3.96° | ∠° | - | - | ||
| +3.76° | ∠° | - | - | ||
| +3.52° | ∠° | - | - | ||
| +1.99° | ∠° | -1° 4' (±30') | -1° 4' (±30') | ||
| +1.98° | ∠° | - | - | ||
| +1.85° | ∠° | - | - | ||
| +1.78° | ∠° | - | - | ||
| +0.80° | ∠° | - | - | ||
| +0.69° | ∠° | - | - | ||
| +0.54° | ∠° | - | - | ||
| +0.26° | ∠° | - | - | ||
| +0.20° | ∠° | - | - | ||
| +0.07° | ∠° | - | - | ||
| -0.78° | ∠° | - | - | ||
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 204.0/2 as of model refinement package, with code 482 | Model 204.0/2 as of model refinement package, with code 483/486, except 4MATIC | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AC | Camber at vehicle level | +4.75° | ∠° | - | - |
| +3.96° | ∠° | - | - | ||
| +3.76° | ∠° | - | - | ||
| +3.52° | ∠° | -0° 43' (±30') | - | ||
| +1.99° | ∠° | - | - | ||
| +1.98° | ∠° | - | - | ||
| +1.85° | ∠° | - | - | ||
| +1.78° | ∠° | - | - | ||
| +0.80° | ∠° | - | - | ||
| +0.69° | ∠° | - | - | ||
| +0.54° | ∠° | - | - | ||
| +0.26° | ∠° | - | -1° 28' (±30') | ||
| +0.20° | ∠° | - | - | ||
| +0.07° | ∠° | - | - | ||
| -0.78° | ∠° | - | - | ||
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 204.0/2 as of model refinement package, with code 485, except 4MATIC | Model 204.0/2 as of model refinement package, with code 677, except 4MATIC | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AC | Camber at vehicle level | +4.75° | ∠° | - | - |
| +3.96° | ∠° | - | - | ||
| +3.76° | ∠° | - | - | ||
| +3.52° | ∠° | - | - | ||
| +1.99° | ∠° | -1° 4' (±30') | -1° 4' (±30') | ||
| +1.98° | ∠° | - | - | ||
| +1.85° | ∠° | - | - | ||
| +1.78° | ∠° | - | - | ||
| +0.80° | ∠° | - | - | ||
| +0.69° | ∠° | - | - | ||
| +0.54° | ∠° | - | - | ||
| +0.26° | ∠° | - | - | ||
| +0.20° | ∠° | - | - | ||
| +0.07° | ∠° | - | - | ||
| -0.78° | ∠° | - | - | ||
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 204.3 with code 483/486, except code P84, except 4MATIC | Model 204.3 with code 677, except 4MATIC | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AC | Camber at vehicle level | +4.75° | ∠° | - | - |
| +3.96° | ∠° | - | - | ||
| +3.76° | ∠° | - | - | ||
| +3.52° | ∠° | - | - | ||
| +1.99° | ∠° | - | -1° 4' (±30') | ||
| +1.98° | ∠° | - | - | ||
| +1.85° | ∠° | - | - | ||
| +1.78° | ∠° | - | - | ||
| +0.80° | ∠° | - | - | ||
| +0.69° | ∠° | - | - | ||
| +0.54° | ∠° | - | - | ||
| +0.26° | ∠° | -1° 28' (±30') | - | ||
| +0.20° | ∠° | - | - | ||
| +0.07° | ∠° | - | - | ||
| -0.78° | ∠° | - | - | ||
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 204.3 with code P84 | Model 204.0/2/3 with 4MATIC, with code 486 | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AC | Camber at vehicle level | +4.75° | ∠° | - | - |
| +3.96° | ∠° | - | - | ||
| +3.76° | ∠° | - | - | ||
| +3.52° | ∠° | - | - | ||
| +1.99° | ∠° | - | - | ||
| +1.98° | ∠° | - | - | ||
| +1.85° | ∠° | - | - | ||
| +1.78° | ∠° | - | - | ||
| +0.80° | ∠° | -1° 48' (±30') | - | ||
| +0.69° | ∠° | - | - | ||
| +0.54° | ∠° | - | - | ||
| +0.26° | ∠° | - | - | ||
| +0.20° | ∠° | - | -1° 25' (±30') | ||
| +0.07° | ∠° | - | - | ||
| -0.78° | ∠° | - | - | ||
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 204.0/2/3 with 4MATIC, with code 677 | Model 204.9 with code 485, except code 460/494/830 | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AC | Camber at vehicle level | +4.75° | ∠° | - | - |
| +3.96° | ∠° | - | - | ||
| +3.76° | ∠° | - | -1° 11' (±30') | ||
| +3.52° | ∠° | - | - | ||
| +1.99° | ∠° | - | - | ||
| +1.98° | ∠° | - | - | ||
| +1.85° | ∠° | -1° 1' (±30') | - | ||
| +1.78° | ∠° | - | - | ||
| +0.80° | ∠° | - | - | ||
| +0.69° | ∠° | - | - | ||
| +0.54° | ∠° | - | - | ||
| +0.26° | ∠° | - | - | ||
| +0.20° | ∠° | - | - | ||
| +0.07° | ∠° | - | - | ||
| -0.78° | ∠° | - | - | ||
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 204.9 as of model refinement package, with code 491, except code 460/494/830 | Model 204.9 with code 482 | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AC | Camber at vehicle level | +4.75° | ∠° | - | -0° 59' (±30') |
| +3.96° | ∠° | - | - | ||
| +3.76° | ∠° | - | - | ||
| +3.52° | ∠° | - | - | ||
| +1.99° | ∠° | - | - | ||
| +1.98° | ∠° | -1° 31' (±30') | - | ||
| +1.85° | ∠° | - | - | ||
| +1.78° | ∠° | - | - | ||
| +0.80° | ∠° | - | - | ||
| +0.69° | ∠° | - | - | ||
| +0.54° | ∠° | - | - | ||
| +0.26° | ∠° | - | - | ||
| +0.20° | ∠° | - | - | ||
| +0.07° | ∠° | - | - | ||
| -0.78° | ∠° | - | - | ||
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 204.9 with code 486 | Model 204.9 with code 460/494/830 | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AC | Camber at vehicle level | +4.75° | ∠° | - | - |
| +3.96° | ∠° | - | -1° 8' (±30') | ||
| +3.76° | ∠° | - | - | ||
| +3.52° | ∠° | - | - | ||
| +1.99° | ∠° | - | - | ||
| +1.98° | ∠° | - | - | ||
| +1.85° | ∠° | - | - | ||
| +1.78° | ∠° | -1° 33' (±30') | - | ||
| +0.80° | ∠° | - | - | ||
| +0.69° | ∠° | - | - | ||
| +0.54° | ∠° | - | - | ||
| +0.26° | ∠° | - | - | ||
| +0.20° | ∠° | - | - | ||
| +0.07° | ∠° | - | - | ||
| -0.78° | ∠° | - | - | ||
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 204.0/2 AMG up to model refinement package | Model 204.0/2 AMG as of model refinement package Model 204.3 AMG except code P98 |
||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AC | Camber at vehicle level | +4.75° | ∠° | - | - |
| +3.96° | ∠° | - | - | ||
| +3.76° | ∠° | - | - | ||
| +3.52° | ∠° | - | - | ||
| +1.99° | ∠° | - | - | ||
| +1.98° | ∠° | - | - | ||
| +1.85° | ∠° | - | - | ||
| +1.78° | ∠° | - | - | ||
| +0.80° | ∠° | - | - | ||
| +0.69° | ∠° | -1° 25' (±30') | - | ||
| +0.54° | ∠° | - | - | ||
| +0.26° | ∠° | - | - | ||
| +0.20° | ∠° | - | - | ||
| +0.07° | ∠° | - | -1° 58' (±30') | ||
| -0.78° | ∠° | - | - | ||
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 204.3 AMG with code P98 except code 224 | Model 204.3 AMG with code P98+code 224 | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AC | Camber at vehicle level | +4.75° | ∠° | - | - |
| +3.96° | ∠° | - | - | ||
| +3.76° | ∠° | - | - | ||
| +3.52° | ∠° | - | - | ||
| +1.99° | ∠° | - | - | ||
| +1.98° | ∠° | - | - | ||
| +1.85° | ∠° | - | - | ||
| +1.78° | ∠° | - | - | ||
| +0.80° | ∠° | - | - | ||
| +0.69° | ∠° | - | - | ||
| +0.54° | ∠° | - | -1° 57' (±24') | ||
| +0.26° | ∠° | - | - | ||
| +0.20° | ∠° | - | - | ||
| +0.07° | ∠° | - | - | ||
| -0.78° | ∠° | -2° 11' (±24') | - | ||
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 212.0 with code 485, except 4MATIC | Model 212.0 with code 485, with 4MATIC | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AD | Camber at vehicle level | -1.29° | ∠° | - | - |
| -1.24° | ∠° | - | - | ||
| -0.79° | ∠° | - | - | ||
| -0.26° | ∠° | - | - | ||
| -0.06° | ∠° | - | - | ||
| +0.03° | ∠° | - | - | ||
| +0.72° | ∠° | - | - | ||
| +1.60° | ∠° | -1° 2' (±30') | -1° 2' (±30') | ||
| +2.58° | ∠° | - | - | ||
| +3.07° | ∠° | - | - | ||
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 212.0 with code 486/677, except 4MATIC | Model 212.0 with code 486/677, with 4MATIC | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AD | Camber at vehicle level | -1.29° | ∠° | - | - |
| -1.24° | ∠° | - | - | ||
| -0.79° | ∠° | - | - | ||
| -0.26° | ∠° | - | - | ||
| -0.06° | ∠° | -1° 27' (±30') | -1° 27' (±30') | ||
| +0.03° | ∠° | - | - | ||
| +0.72° | ∠° | - | - | ||
| +1.60° | ∠° | - | - | ||
| +2.58° | ∠° | - | - | ||
| +3.07° | ∠° | - | - | ||
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 212.002 with code P25 | Model 212.0/2 with code 482 | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AD | Camber at vehicle level | -1.29° | ∠° | - | - |
| -1.24° | ∠° | - | - | ||
| -0.79° | ∠° | - | - | ||
| -0.26° | ∠° | - | - | ||
| -0.06° | ∠° | - | - | ||
| +0.03° | ∠° | - | - | ||
| +0.72° | ∠° | -1° 15' (±30') | - | ||
| +1.60° | ∠° | - | - | ||
| +2.58° | ∠° | - | - | ||
| +3.07° | ∠° | - | 0° -42' (±30') | ||
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 212.0/2 with code 489, except 4MATIC | Model 212.0/2 with code 489, with 4MATIC | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AD | Camber at vehicle level | -1.29° | ∠° | - | - |
| -1.24° | ∠° | - | - | ||
| -0.79° | ∠° | - | - | ||
| -0.26° | ∠° | -1° 30' (±30') | -1° 30' (±30') | ||
| -0.06° | ∠° | - | - | ||
| +0.03° | ∠° | - | - | ||
| +0.72° | ∠° | - | - | ||
| +1.60° | ∠° | - | - | ||
| +2.58° | ∠° | - | - | ||
| +3.07° | ∠° | - | - | ||
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 212.1 with code 482 | Model 212.1 with code 485 | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AD | Camber at vehicle level | -1.29° | ∠° | - | - |
| -1.24° | ∠° | - | - | ||
| -0.79° | ∠° | - | - | ||
| -0.26° | ∠° | - | - | ||
| -0.06° | ∠° | - | - | ||
| +0.03° | ∠° | - | - | ||
| +0.72° | ∠° | - | - | ||
| +1.60° | ∠° | - | -1° 2' (±30') | ||
| +2.58° | ∠° | 0° -49' (±30') | - | ||
| +3.07° | ∠° | - | - | ||
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 212.2 with code 485, except 4MATIC | Model 212.2 with code 485, with 4MATIC | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AD | Camber at vehicle level | -1.29° | ∠° | - | - |
| -1.24° | ∠° | - | - | ||
| -0.79° | ∠° | - | - | ||
| -0.26° | ∠° | - | -1° 30' (±30') | ||
| -0.06° | ∠° | - | - | ||
| +0.03° | ∠° | -1° 25' (±30') | - | ||
| +0.72° | ∠° | - | - | ||
| +1.60° | ∠° | - | - | ||
| +2.58° | ∠° | - | - | ||
| +3.07° | ∠° | - | - | ||
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 212.2 with code 486/677, except 4MATIC | Model 212.2 with code 486/677, with 4MATIC | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AD | Camber at vehicle level | -1.29° | ∠° | - | - |
| -1.24° | ∠° | -1° 45' (±30') | -1° 45' (±30') | ||
| -0.79° | ∠° | - | - | ||
| -0.26° | ∠° | - | - | ||
| -0.06° | ∠° | - | - | ||
| +0.03° | ∠° | - | - | ||
| +0.72° | ∠° | - | - | ||
| +1.60° | ∠° | - | - | ||
| +2.58° | ∠° | - | - | ||
| +3.07° | ∠° | - | - | ||
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | MODEL 212.025/056/072 with CODEZ04 | Model 212 AMG up to 11.2011, except 4MATIC | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AD | Camber at vehicle level | -1.29° | ∠° | - | - |
| -1.24° | ∠° | - | -2° 15' (±24') | ||
| -0.79° | ∠° | - | - | ||
| -0.26° | ∠° | -1° 30' (±30') | - | ||
| -0.06° | ∠° | - | - | ||
| +0.03° | ∠° | - | - | ||
| +0.72° | ∠° | - | - | ||
| +1.60° | ∠° | - | - | ||
| +2.58° | ∠° | - | - | ||
| +3.07° | ∠° | - | - | ||
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 212 AMG as of 12.2011, except 4MATIC | Model 212 AMG with 4MATIC | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AD | Camber at vehicle level | -1.29° | ∠° | - | -2° 22' (±24') |
| -1.24° | ∠° | - | - | ||
| -0.79° | ∠° | -2° 15' (±24') | - | ||
| -0.26° | ∠° | - | - | ||
| -0.06° | ∠° | - | - | ||
| +0.03° | ∠° | - | - | ||
| +0.72° | ∠° | - | - | ||
| +1.60° | ∠° | - | - | ||
| +2.58° | ∠° | - | - | ||
| +3.07° | ∠° | - | - | ||
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 207 with code 483/485/486 except 4Matic | MODEL 207 with 4MATIC | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AE | Camber at vehicle level | -1.07° | ∠° | -1° 48' (±30') | - |
| -0.78° | ∠° | - | -1° 40' (±30') | ||
| -0.05° | ∠° | -1° 23' (±30') | - | ||
| +0.20° | ∠° | - | -1° 25' (±30') | ||
| +0.97° | ∠° | -1° 18' (±30') | - | ||
| +1.17° | ∠° | - | -1° 11' (±30') | ||
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | MODEL 218.3 except 4MATIC, except CODE 489 | MODEL 218.9 except 4MATIC, except CODE 489 | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AG | Camber at vehicle level | -2.46° | ∠° | -1° 28' (±30') | -2° 0' (±30') |
| -2.29° | ∠° | - | - | ||
| -2.22° | ∠° | - | - | ||
| -1.79° | ∠° | - | - | ||
| -1.66° | ∠° | - | - | ||
| -1.46° | ∠° | - | -1° 45' (±30') | ||
| -1.36° | ∠° | -1° 43' (±30') | - | ||
| -1.29° | ∠° | - | - | ||
| -1.24° | ∠° | - | - | ||
| -0.79° | ∠° | - | - | ||
| -0.65° | ∠° | - | - | ||
| -0.45° | ∠° | - | -1° 30' (±30') | ||
| -0.35° | ∠° | -1° 28' (±30') | - | ||
| -0.29° | ∠° | - | - | ||
| -0.26° | ∠° | - | - | ||
| +0.21° | ∠° | - | - | ||
| +0.35° | ∠° | - | - | ||
| +0.55° | ∠° | - | - | ||
| +0.65° | ∠° | -1° 13' (±30') | - | ||
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | MODEL 218 except 4MATIC, with CODE 489 | MODEL 218.3 with 4MATIC, except CODE 489 | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AG | Camber at vehicle level | -2.46° | ∠° | - | |
| -2.29° | ∠° | - | - | ||
| -2.22° | ∠° | - | - | ||
| -1.79° | ∠° | - | - | ||
| -1.66° | ∠° | -1° 48' (±30') | |||
| -1.46° | ∠° | -1° 45' (±30') | |||
| -1.36° | ∠° | - | - | ||
| -1.29° | ∠° | - | - | ||
| -1.24° | ∠° | - | - | ||
| -0.79° | ∠° | - | - | ||
| -0.65° | ∠° | -1° 32' (±30') | |||
| -0.45° | ∠° | -1° 30' (±30') | - | ||
| -0.35° | ∠° | - | - | ||
| -0.29° | ∠° | - | - | ||
| -0.26° | ∠° | - | - | ||
| +0.21° | ∠° | - | - | ||
| +0.35° | ∠° | - | -1° 18' (±30') | ||
| +0.55° | ∠° | -1° 15' (±30') | - | ||
| +0.65° | ∠° | - | - | ||
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | MODEL 218.9 with 4MATIC, except code 489 | MODEL 218 with 4MATIC, with code 489 | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AG | Camber at vehicle level | -2.46° | ∠° | -2° 0' (±30') | - |
| -2.29° | ∠° | - | - | ||
| -2.22° | ∠° | - | - | ||
| -1.79° | ∠° | - | - | ||
| -1.66° | ∠° | - | - | ||
| -1.46° | ∠° | -1° 45' (±30') | -1° 45' (±30') | ||
| -1.36° | ∠° | - | - | ||
| -1.29° | ∠° | - | - | ||
| -1.24° | ∠° | - | - | ||
| -0.79° | ∠° | - | - | ||
| -0.65° | ∠° | - | - | ||
| -0.45° | ∠° | -1° 30' (±30') | -1° 30' (±30') | ||
| -0.35° | ∠° | - | - | ||
| -0.29° | ∠° | - | - | ||
| -0.26° | ∠° | - | - | ||
| +0.21° | ∠° | - | - | ||
| +0.35° | ∠° | - | - | ||
| +0.55° | ∠° | - | -1° 15' (±30') | ||
| +0.65° | ∠° | - | - | ||
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | MODEL 218.3 AMG up to 11.2011 | MODEL 218.3 AMG as of 12.2011 except 4MATIC | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AG | Camber at vehicle level | -2.46° | ∠° | - | - |
| -2.29° | ∠° | - | - | ||
| -2.22° | ∠° | -2° 29' (±24) | - | ||
| -1.79° | ∠° | - | -2° 29' (±24) | ||
| -1.66° | ∠° | - | - | ||
| -1.46° | ∠° | - | - | ||
| -1.36° | ∠° | - | - | ||
| -1.29° | ∠° | - | - | ||
| -1.24° | ∠° | -2° 15' (±24) | - | ||
| -0.79° | ∠° | - | -2° 15' (±24) | ||
| -0.65° | ∠° | - | - | ||
| -0.45° | ∠° | - | - | ||
| -0.35° | ∠° | - | - | ||
| -0.29° | ∠° | - | - | ||
| -0.26° | ∠° | -2° 1' (±24) | - | ||
| +0.21° | ∠° | - | -2° 1' (±24) | ||
| +0.35° | ∠° | - | - | ||
| +0.55° | ∠° | - | |||
| +0.65° | ∠° | - | - | ||
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | MODEL 218.9 AMG except 4MATIC | MODEL 218.3/9 AMG with 4MATIC | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AG | Camber at vehicle level | -2.46° | ∠° | - | - |
| -2.29° | ∠° | -2° 37' (±24) | -2° 37' (±24) | ||
| -2.22° | ∠° | - | - | ||
| -1.79° | ∠° | - | - | ||
| -1.66° | ∠° | - | - | ||
| -1.46° | ∠° | - | - | ||
| -1.36° | ∠° | - | - | ||
| -1.29° | ∠° | -2° 22' (±24) | -2° 22' (±24) | ||
| -1.24° | ∠° | - | - | ||
| -0.79° | ∠° | - | - | ||
| -0.65° | ∠° | - | - | ||
| -0.45° | ∠° | - | - | ||
| -0.35° | ∠° | - | - | ||
| -0.29° | ∠° | -2° 8' (±24) | -2° 8' (±24) | ||
| -0.26° | ∠° | - | - | ||
| +0.21° | ∠° | - | - | ||
| +0.35° | ∠° | - | - | ||
| +0.55° | ∠° | - | - | ||
| +0.65° | ∠° | - | - | ||
TEST AND ADJUSTMENT VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 172.403/447/448/457 up to model year 2015 except code 483/486 | Model 172.403/447/448/45 7 up to model year 2015 with code 483/486 | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AH | Rear axle camber at vehicle level | 0.35° | ∠° | - | - |
| 0.94° | ∠° | - | -1°24' (±30') | ||
| 1.23° | ∠° | - | - | ||
| 1.31° | ∠° | - | - | ||
| 1.52° | ∠° | - | - | ||
| 1.91° | ∠° | -1°13' (±30') | - | ||
TEST AND ADJUSTMENT VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 172.403/447/448/457 as of model year 2016 except code 483/486 Model 172.404/431/434/438 except code 483/486 |
Model 172.403/447/448/45 7 as of model year 2016 with code 483/486 Model 172.404/431/434/43 8 with code 483/486 |
||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AH | Rear axle camber at vehicle level | 0.35° | ∠° | - | -1°24' (±30') |
| 0.94° | ∠° | - | - | ||
| 1.23° | ∠° | - | - | ||
| 1.31° | ∠° | -1°13' (±30') | - | ||
| 1.52° | ∠° | - | - | ||
| 1.91° | ∠° | - | - | ||
TEST AND ADJUSTMENT VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 172.466 AMG | Model 172.475 AMG | ||
|---|---|---|---|---|---|
| BE40.20-P-1001-09AH | Rear axle camber at vehicle level | 0.35° | ∠° | - | - |
| 0.94° | ∠° | - | - | ||
| 1.23° | ∠° | -2°0' (±30') | - | ||
| 1.31° | ∠° | - | - | ||
| 1.52° | ∠° | - | -1°43' (±30') | ||
| 1.91° | ∠° | - | - | ||
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 204.0/2 up to model refinement package, with cross strut (old version), with code 482 | Model 204.0/2 up to model refinement package, with cross strut (new version), with code 482 | |
|---|---|---|---|---|
| BE40.20-P-1002-09AC | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ±30' | ±30' |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 204.0/2 up to model refinement package, with cross strut (old version), with code 483/486, except 4MATIC | Model 204.0/2 up to model refinement package, with cross strut (new version), with code 483/486, except 4MATIC | |
|---|---|---|---|---|
| BE40.20-P-1002-09AC | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ± 30' | ±30' |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 204.0/2 up to model refinement package, with cross strut (old version), with code 485/677, except 4MATIC | Model 204.0/2 up to model refinement package, with cross strut (new version), with code 485/677, except 4MATIC | |
|---|---|---|---|---|
| BE40.20-P-1002-09AC | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ±30' | ±30' |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 204.0/2 as of model refinement package, with code 482 | Model 204.0/2 as of model refinement package, with code 483/486, except 4MATIC | |
|---|---|---|---|---|
| BE40.20-P-1002-09AC | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ±30' | ±30' |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 204.0/2 as of model refinement package, with code 485, except 4MATIC | Model 204.0/2 as of model refinement package, with code 677, except 4MATIC | |
|---|---|---|---|---|
| BE40.20-P-1002-09AC | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ±30' | ±30' |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 204.3 with code 483/486, except code P84, except 4MATIC | Model 204.3 with code 677, except 4MATIC | |
|---|---|---|---|---|
| BE40.20-P-1002-09AC | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ±30' | ±30' |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 204.3 with code P84 | Model 204.0/2/3 with 4MATIC, with code 486 | |
|---|---|---|---|---|
| BE40.20-P-1002-09AC | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ±30' | ±30' |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 204.0/2/3 with 4MATIC, with code 677 | Model 204.9 with code 485, except code 460/494/830 | |
|---|---|---|---|---|
| BE40.20-P-1002-09AC | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ±30' | ±30' |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 204.9 as of model refinement package, with code 491, except code 460/494/830 | Model 204.9 with code 482 | |
|---|---|---|---|---|
| BE40.20-P-1002-09AC | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ±30' | ±30' |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 204.9 with code 486 | Model 204.9 with code 460/494/830 | |
|---|---|---|---|---|
| BE40.20-P-1002-09AC | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ±30' | ±30' |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 204.0/2 AMG up to model refinement package | Model 204.0/2 AMG as of model refinement package Model 204.3 AMG except code P98 |
|
|---|---|---|---|---|
| BE40.20-P-1002-09AC | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ±30' | ±30' |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 204.3 AMG with code P98 except code 224 | Model 204.3 AMG with code P98+code 224 | |
|---|---|---|---|---|
| BE40.20-P-1002-09AC | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ±24' | ±24' |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 212.0 with code 485, except 4MATIC | Model 212.0 with code 485, with 4MATIC | |
|---|---|---|---|---|
| BE40.20-P-1002-09AD | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ±0° 30' | ±0° 30' |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 212.0 with code 486/677, except 4MATIC | Model 212.0 with code 486/677, with 4MATIC | |
|---|---|---|---|---|
| BE40.20-P-1002-09AD | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ±0° 30' | ±0° 30' |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 212.002 with code P25 | Model 212.0/2 with code 482 | |
|---|---|---|---|---|
| BE40.20-P-1002-09AD | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ±0° 30' | ±0° 30' |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 212.0/2 with code 489, except 4MATIC | Model 212.0/2 with code 489, with 4MATIC | |
|---|---|---|---|---|
| BE40.20-P-1002-09AD | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ± 0° 30' | ± 0° 30' |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 212.1 with code 482 | Model 212.1 with code 485 | |
|---|---|---|---|---|
| BE40.20-P-1002-09AD | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ±0° 30' | ±0° 30' |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 212.2 with code 485, except 4MATIC | Model 212.2 with code 485, with 4MATIC | |
|---|---|---|---|---|
| BE40.20-P-1002-09AD | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ± 0° 30' | ± 0° 30' |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 212.2 with code 486/677, except 4MATIC | Model 212.2 with code 486/677, with 4MATIC | |
|---|---|---|---|---|
| BE40.20-P-1002-09AD | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ± 0° 30' | ± 0° 30' |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | MODEL 212.025/056/072 with CODEZ04 | Model 212 AMG up to 11.2011, except 4MATIC | |
|---|---|---|---|---|
| BE40.20-P-1002-09AD | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ±0° 30' | ±0° 24' |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 212 AMG as of 12.2011, except 4MATIC | Model 212 AMG with 4MATIC | |
|---|---|---|---|---|
| BE40.20-P-1002-09AD | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ± 0° 24' | ± 0° 24' |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 207 with code 483/485/486 except 4Matic | MODEL 207 with 4MATIC | |
|---|---|---|---|---|
| BE40.20-P-1002-09AE | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ± 30' | ± 30' |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | MODEL 218.3 except 4MATIC, except CODE 489 | MODEL 218.9 except 4MATIC, except CODE 489 | |
|---|---|---|---|---|
| BE40.20-P-1002-09AG | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ±30' | ±30' |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | MODEL 218 except 4MATIC, with CODE 489 | MODEL 218.3 with 4MATIC, except CODE 489 | |
|---|---|---|---|---|
| BE40.20-P-1002-09AG | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ± 30' | ± 30' |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | MODEL 218.9 with 4MATIC, except code 489 | MODEL 218 with 4MATIC, with code 489 | |
|---|---|---|---|---|
| BE40.20-P-1002-09AG | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ±30' | ±30' |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | MODEL 218.3 AMG up to 11.2011 | MODEL 218.3 AMG as of 12.2011 except 4MATIC | |
|---|---|---|---|---|
| BE40.20-P-1002-09AG | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ±24' | ±24' |
CHECK VALUES FOR REAR AXLE CAMBER
| Number | Designation | MODEL 218.9 AMG except 4MATIC | MODEL 218.3/9 AMG with 4MATIC | |
|---|---|---|---|---|
| BE40.20-P-1002-09AG | Permissible difference in rear axle camber between right and left side of vehicle | ∠° | ±24' | ±24' |
TEST AND ADJUSTMENT VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 172.403/447/448/457 up to model year 2015 except code 483/486 | Model 172.403/447/448/45 7 up to model year 2015 with code 483/486 | |
|---|---|---|---|---|
| BE40.20-P-1002-09AH | Permissible difference in rear axle camber between right and left sides of vehicle | ∠° | 30' | 30' |
TEST AND ADJUSTMENT VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 172.403/447/448/457 as of model year 2016 except code 483/486 Model 172.404/431/434/438 except code 483/486 |
Model 172.403/447/448/45 7 as of model year 2016 with code 483/486 Model 172.404/431/434/43 8 with code 483/486 |
|
|---|---|---|---|---|
| BE40.20-P-1002-09AH | Permissible difference in rear axle camber between right and left sides of vehicle | ∠° | 30' | 30' |
TEST AND ADJUSTMENT VALUES FOR REAR AXLE CAMBER
| Number | Designation | Model 172.466 AMG | Model 172.475 AMG | |
|---|---|---|---|---|
| BE40.20-P-1002-09AH | Permissible difference in rear axle camber between right and left sides of vehicle | ∠° | 30' | 30' |