"Check Caster And Assign To Tabular Value - AR40.20-P-0322-03W
WARNING: This page is about a different car, the 2020 Mercedes-Benz SLC43 AMG, 2019 Mercedes-Benz SLC43 AMG, 2018 Mercedes-Benz SLC43 AMG, and 2017 Mercedes-Benz SLC43 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 172
TEST AND ADJUSTMENT VALUES FOR CASTER
| Number | Designation | Model 172 |
|---|---|---|
| BE40.20-P-1001-20N | Caster values, form | |
| See | OF40.20-P-3000-00B |
TEST AND ADJUSTMENT VALUES FOR CASTER
| Number | Designation | Model 172 | |
|---|---|---|---|
| BE40.20-P-1002-20N | Permissible difference in caster between right and left side of vehicle | ∠° | ± 30' |
TEST AND ADJUSTMENT VALUES FOR CASTER
| Number | Designation | Model 172 | |
|---|---|---|---|
| BE40.20-P-1003-20N | absolute caster tolerance | ∠° | ± 30' |
The level values are displayed by the electronic inclinometer in decimal degrees [°].
- Obtain the caster value from the form taking into account the front axle (FA) level values and rear axle (RA) level values measured previously.
For example, see: Caster values, form on model 172.403/447/448/457 up to model year 2015 except code 483/486
: Front axle level value (FA): +3, 26° rear axle level value (RA): +1.91° = Caster value 10°48" (± 30')