LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> GLE350 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 259 (Electrical System - Body - 172 Chassis - 2 Of 5) >> Basic Knowledge >> Washer System Mode, Basic Function - GF82.90-P-9903A

Washer System Mode, Basic Function - GF82.90-P-9903A

WARNING: This page is about a different car, the 2020 Mercedes-Benz SLC43 AMG, 2019 Mercedes-Benz SLC43 AMG, 2018 Mercedes-Benz SLC43 AMG, and 2017 Mercedes-Benz SLC43 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model all (CAR) 

Overview 

This document contains information on:

General 

To be able to use a washing facility without damage to the vehicle, the vehicle must be prepared for this. Activating the washing facility mode performs the necessary measures automatically.

IMPORTANT Washing facility mode is not available in all vehicles. The functional scope depends on the equipment installed.

Function requirements 

Switching washing facility mode on/off and status display 

Washing facility mode is switched on and off via a head unit menu. If the vehicle exceeds a speed of approx. 20 km/h, washing facility mode is automatically switched off.

The intended settings are shown on the central display. Similarly, the display indicates if one of the specified settings cannot be set.

Function overview 

Preparation of the vehicle for the washing facility includes the following settings:

Switching off the washing facility mode encompasses the following procedures:

  Control units     
  Head unit control unit, basic function Vehicles with Connect 20 GF82.85-P-9891A