Connect Star Diagnosis And Read Out Fault Memory - AD00.00-P-2000-04A

WARNING: This page is about a different car, the 2020 Mercedes-Benz SLC43 AMG, 2019 Mercedes-Benz SLC43 AMG, 2018 Mercedes-Benz SLC43 AMG, and 2017 Mercedes-Benz SLC43 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model 117, 124.034/036, 129, 140, 156, 163, 164, 166, 168, 169, 170, 171.4, 172, 176, 197, 199, 202, 203, 204, 207, 208, 209, 210, 211, 212, 215, 216, 218, 219, 220, 221, 230, 231, 240, 242, 245, 246, 251, 292, 414

Model 461

Model 463

up to model year 2019

Shown on model 210

Courtesy of MERCEDES-BENZ USA

Shown on model 204

Courtesy of MERCEDES-BENZ USA

Connect diagnostic system (2) to diagnostic connector (1).
Start diagnosis.
Select the model series in the menu.
The work procedures in the diagnosis program are menu-assisted.

Stored faults which may be caused by disconnecting cables or by simulation during testing operations must be deleted in the diagnostic trouble code memory following completion of the operations.
Disconnect diagnostic system (2).
Following completion of diagnostic operations.