Perform Adjustments To The Control System - AR54.30-P-1000-02RAE

WARNING: This page is about a different car, the 2020 Mercedes-Benz SLC43 AMG, 2019 Mercedes-Benz SLC43 AMG, 2018 Mercedes-Benz SLC43 AMG, and 2017 Mercedes-Benz SLC43 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model 166, 172, 207, 212, 218, 231

without Code 475 (Tire pressure monitor (Schrader)) Restart tire pressure loss warning

Shown on model 212.002

Before activating the tire pressure loss warning (TPM), correct tire pressures of wheels on front and rear axles.

Switch on ignition.
Keep pressing the system select button (S110s3) until the "Service" menu is highlighted with a bar in the multifunction display (A1p13).
Select "Tire pressure" with the scroll forward/back button (S110s1).
Press OK button (S110s6).
The "Restart tire pressure monitoring active with OK" note is shown in the multifunction display (A1p13).
Press OK button (S110s6) to activate tire pressure monitoring.
The note "Tire pressure now OK?" is shown in the multifunction display (A1p13).
Select "Yes" with scroll forwards and backwards button (S110s1).

Courtesy of MERCEDES-BENZ USA
Press OK button (S110s6).
The note "Tire pressure monitoring active restart with OK" is shown in the multifunction display (A1p13). After the teach-in phase the tire pressure loss warning (TPM) monitors the tire pressure adjusted in all four tires.
Switch off ignition.