Remove/Install Rocker Pendulum On Master Brake Cylinder - AR42.10-P-0300-02V
WARNING: This page is about a different car, the 2020 Mercedes-Benz SLC43 AMG, 2019 Mercedes-Benz SLC43 AMG, 2018 Mercedes-Benz SLC43 AMG, and 2017 Mercedes-Benz SLC43 AMG. However, it is still accessible from the selected car via links, so may be relevant.
MODEL 171, 172
Removing
- Remove lock nut (1) from journal of master Brake cylinder (2).
- Unscrew nut (3a) of pendulum support (3) and pull pendulum support (3) with rubber grommet (4) off master Brake cylinder (2).
- Check grommet (4) for damage, replace if necessary.
Illustrated on Model 171
Install
- Mount new spring nut (1).
Push the lock nut (1) approx. 5 mm (x) onto the journal of the master Brake cylinder (2). This prevents the pendulum support (3) from slipping off the journal of the master Brake cylinder (2).