Multicontour Seat Pneumatic Pump, Basic Function - GF91.25-P-2005A

WARNING: This page is about a different car, the 2020 Mercedes-Benz SLC43 AMG, 2019 Mercedes-Benz SLC43 AMG, 2018 Mercedes-Benz SLC43 AMG, and 2017 Mercedes-Benz SLC43 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model all (CAR)

with code 399 (Front multicontour seat with massage function)

Model all (CAR)

with code 406 (Multicontour rear seat)

Model all (CAR)

with code 409 (Left and right front multicontour seat)

Model all (CAR)

with code 432 (Dynamic seats left and right)

General

The multicontour seat pneumatic pump provides the multicontour seat control unit with the air supply for filling the air cushions.

Function requirements

Circuit 30t ON

Variants

The local multicontour seat pneumatic pump is located in the armrest of each seat. It provides the air supply for this seat.

The central pneumatic pump is located away from the seats in the trunk. It provides the air supply for several seats. The central pneumatic pump is connected to the vehicle's network architecture.