(Perform Adjustments To The Control System - AR54.30-P-1000-02RAU)

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2023 Mercedes-Benz E63 S AMG, 2023 Mercedes-Benz E53 AMG, 2023 Mercedes-Benz E350, 2022 Mercedes-Benz E53 AMG, and 2022 Mercedes-Benz E350. However, it is still accessible from the selected car via links, so may be relevant.

Model 166, 172, 207, 212, 218, 231 with code 475 (Tire pressure monitoring system) Model 205, 253 with code 475 (Tire pressure monitoring system)

Correct air pressure for all tires.
Switch on ignition.
Keep pressing the system select button (S110s3) until the "Service" menu is highlighted with a bar in the multifunction display (A1p13).
Restart tire pressure monitor, shown on model 212.002

Courtesy of MERCEDES-BENZ USA
Select "Tire pressure" with the scroll forward/back button (S110s1).
OK button (S110s6) press.
In the multifunction display (A1p13), the current tire pressures or the note "Tire pressure display appears after driving for a few minutes" are displayed.
Press scroll forward/back button (S110s1).
The note "Adopt current pressures as new guideline values" is shown in the multifunction display (A1p13).
OK button (S110s6) press.
The note "Tire pressure monitoring restarted" is shown in the multifunction display (A1p13). After a few minutes' driving the tire pressures are displayed and monitored.
Switch off ignition.