Remove/Install Mechanical Stop Lamp Switch - AR42.10-P-0040EW
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2023 Mercedes-Benz E63 S AMG, 2023 Mercedes-Benz E53 AMG, 2023 Mercedes-Benz E350, 2022 Mercedes-Benz E53 AMG, and 2022 Mercedes-Benz E350. However, it is still accessible from the selected car via links, so may be relevant.
Model 166, 172, 190, 197, 201, 204, 207, 212, 217, 218, 221, 231, 292
Model 205 (except 205.012/013/047/053/054/147/212/213/247/253)
except code B01 (48V technology)
Model 213 (except 213.016/050/053/054/153/155/216/253)
except code B01 (48V technology)
Model 222 (except 222.004/057/104/157/163)
except code B01 (48V technology)
Model 253 (except 253.311/353/354/911/953/954)
except code B01 (48V technology)
Fig 1: Mechanical Stop Lamp Switch Components Location - Model 213 (Except 213.016/050/053/054/153/155/216/253) Except Code B01
| Notes on safety-relevant components | AH00.00-Z-0019-01A | ||
| Remove | |||
| 1 | Remove cover below instrument panel on driver's side. | Model 221.0/1 | AR68.10-P-1500SX |
| Model 166, 292 | AR68.10-P-1500GQ | ||
| Model 217 Model 222.0 (except 222.004/057), 222.1 (except 222.104/157/163), 222.9 except code B01 (48V technology) |
AR68.10-P-1500LF | ||
| Model 231 | AR68.10-P-1500RK | ||
| Model 205 (except 205.012/013/047/053/054/147/212/213/247/253) except code B01 (48V technology) Model 253 (except 253.311/353/354/911/953/954) except code B01 (48V technology) |
AR68.10-P-1500LW | ||
| Model 213 (except 213.016/050/053/054/153/155/216/253) except code B01 (48V technology) |
AR68.10-P-1501LWE | ||
| Model 190, 197 | AR68.10-P-1501RQ | ||
| 2 | Disconnect electrical connector from brake light switch (4). | ||
| 3 | Remove cover (1). | ||
| 4 | Pull out brake light switch (4). | ||
| 5 | Squeeze catches (arrows) together and detach bracket (2). | ||
| Install | |||
| 6 | Fully depress brake pedal (3) and insert brake light switch (4) with bracket (2). | ||
| 7 | Fully depress brake light switch (4). | ||
| 8 | Release brake pedal (3) and pull back. | ||
| 9 | Install cover (1). | ||
| 10 | Connect electrical connector to brake light switch (4). | ||
| 11 | Install cover below instrument panel on driver's side. | Model 221.0/1 | AR68.10-P-1500SX |
| Model 166, 292 | AR68.10-P-1500GQ | ||
| Model 217 Model 222.0 (except 222.004/057), 222.1 (except 222.104/157/163), 222.9 except code B01 (48V technology) |
AR68.10-P-1500LF | ||
| Model 231 | AR68.10-P-1500RK | ||
| Model 205 (except 205.012/013/047/053/054/147/212/213/247/253) except code B01 (48V technology) Model 253 (except 253.311/353/354/911/953/954) except code B01 (48V technology) |
AR68.10-P-1500LW | ||
| Model 213 (except 213.016/050/053/054/153/155/216/253) except code B01 (48V technology) | AR68.10-P-1501LWE | ||
| Model 190, 197 | AR68.10-P-1501RQ |