Tightening Procedure For High Pressure Fuel Pump Shielding - AR07.02-P-0815-01MRH
Engine 264
FUEL SYSTEM HIGH PRESSURE PUMP
| Number |
Designation |
Engine 264 |
| BA07.02-P-1002-02A |
Bolt for high-pressure pump shielding |
Nm |
20 |
- Slightly tighten screws/bolts (1 to 4) in ascending numerical sequence by hand.
- Tighten screws/bolts (1 to 4) in ascending numerical sequence
.
 Courtesy of MERCEDES-BENZ USA
|