LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> GLE350 4Matic >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (Seats, Bunks, Restraint Systems - 205 Chassis - 1 Of 2) >> Testing & Repair >> Remove/Install Rear Seat Backrest Side Bolster - AR91.12-P-1710LW

Remove/Install Rear Seat Backrest Side Bolster - AR91.12-P-1710LW

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2023 Mercedes-Benz C43 AMG, 2022 Mercedes-Benz C43 AMG, 2021 Mercedes-Benz C43 AMG, 2020 Mercedes-Benz C43 AMG, and 2019 Mercedes-Benz C43 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model 205.0/1, 213.0 

with code 287 (Folding rear seat backrests ) 

Model 205.2/3, 238.3 

Shown on model 205.0 with code 287 (Folding rear seat backrests), valid for model 205.0/1, 213.0 with code 287 (Folding rear seat backrests), model 205.2/3 

G13024013Courtesy of MERCEDES-BENZ USA

Shown on model 238.3 

G13024014Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Remove/install     
1 Remove seat cushion in rear Model 205.0/1
with code 248 (Rear seat with integrated child seat)
with code 287 (Folding rear seat backrests)
Model 205.0
with code 287 (Folding rear seat backrests)
with code P10 (Taxi package Germany)
Model 205.2
with code 248 (Rear seat with integrated child seat)
Model 205.2
with code P10 (Taxi package Germany)
Model 213.0
with code 248 (Rear seat with integrated child seat)
with code 287 (Folding rear seat backrests)
AR91.12-P-1020LWA 
    Model 205.0/1
with code 287 (Folding rear seat backrests)
except code 248 (Rear seat with integrated child seat)
except code P10 (Taxi package Germany)
Model 205.2/3
except code 248 (Rear seat with integrated child seat)
except code P10 (Taxi package Germany)
Model 213.0
with code 287 (Folding rear seat backrests)
except code 248 (Rear seat with integrated child seat)
Model 238.3
AR91.12-P-1020LW 
2 Hang seat belt (1) as shown to one side    
3 Unscrew bolt (3)    
4.1 Lift up side bolster (2) at bottom (arrow a), slide upwards (arrow c) and remove Model 205.0/1, 213.0
with code 287 (Folding rear seat backrests)
Model 205.2/3
INSTALLATION IMPORTANT Ensure correct seating of side bolster (2).
 
4.2 Lift up side bolster (2) at bottom (arrow a), slide downwards (arrow b) and remove Model 238.3
INSTALLATION IMPORTANT Ensure correct seating of side bolster (2).
 
5 Install in the reverse order