LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> GLE350 4Matic >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Interior Equipment - 205 Chassis) >> Testing & Repair >> Remove/Install Door Sill Molding >> Remove/Install Door Sill Molding - AR68.30-P-4100CLW

Remove/Install Door Sill Molding - AR68.30-P-4100CLW

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2023 Mercedes-Benz C43 AMG, 2022 Mercedes-Benz C43 AMG, 2021 Mercedes-Benz C43 AMG, 2020 Mercedes-Benz C43 AMG, and 2019 Mercedes-Benz C43 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model 205.3/4 

Model 238 

Shown on model 205 

G13023622Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Remove/install     
1 Unclip retaining clip (1.1) on door sill (1) below B-pillar SPECIAL TOOL Clip remover Fig 1
2 Detach door sill (1) from retaining clips (2) starting at B-pillar    
3 Loosen door sill (1) from guide on A-pillar and remove    
4 Install in the reverse order    
Fig 1: Identifying Clip Remover (452 589 01 63 00)
G13023623Courtesy of MERCEDES-BENZ USA