Remove/Install Paneling On A-Pillar - AR68.30-P-4050ME
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2025 Mercedes-Benz Maybach GLS600, 2025 Mercedes-Benz GLS63 AMG, 2024 Mercedes-Benz Maybach GLS600, 2024 Mercedes-Benz GLS63 AMG, and 2023 Mercedes-Benz Maybach GLS600. However, it is still accessible from the selected car via links, so may be relevant.
Model 167
| Notes on safety-relevant components | AH00.00-Z-0019-01A | ||
| Remove/install | |||
| 1 | Unclip cover (2). | Fig 1 | |
| 2 | Unclip trim on the A-pillar (1) from the retaining clips (3, 4) and from the retaining clamp (5) and swivel slightly inward at the top. | Fig 1 | |
| 3 | Release retaining lug (5) and pull trim on the A-pillar (1) toward the rear at the top out of the instrument panel and remove. | Fig 1 | |
| 4 | Install in the reverse order. |