Detach/Attach Belt End Fitting - AR91.40-P-1030-02FR
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2025 Mercedes-Benz Maybach GLS600, 2025 Mercedes-Benz GLS63 AMG, 2024 Mercedes-Benz Maybach GLS600, 2024 Mercedes-Benz GLS63 AMG, and 2023 Mercedes-Benz Maybach GLS600. However, it is still accessible from the selected car via links, so may be relevant.
Model 167, 257, 290
except code 460 (Canada version)
except code 494 (US version)
| Notes on safety-relevant components | AH00.00-Z-0019-01A |
Remove
- Pull seat belt end fitting (1) upwards in direction of arrow (A).
- Release seat belt end fitting (1) through minimum (approx. 2 mm) lifting of spring (2) in direction of arrow (B1), then push downwards in direction of arrow (B2) and remove.
Installing
- Position seat belt end fitting (1) in direction of arrow (D) on bolt (3) then pull upwards in direction of arrow (A).
- Push seat belt end fitting (1) downwards in direction of arrow (B2).
The spring (2) must make contact at bolt head of screw/bolt (3). Dimension (E) must be at least 1.7 mm.
- Have engagement checked by a second person.