Prepare Body Flange For Rear Fixed Element Of Panoramic Sliding Sunroof For Installation - AR77.21-P-0802-03ME
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2025 Mercedes-Benz Maybach GLS600, 2025 Mercedes-Benz GLS63 AMG, 2024 Mercedes-Benz Maybach GLS600, 2024 Mercedes-Benz GLS63 AMG, and 2023 Mercedes-Benz Maybach GLS600. However, it is still accessible from the selected car via links, so may be relevant.
Model 167.1/9
With Code 413 (Automatic panoramic sliding sunroof)
| Topical note | Notes on removal/installation of bonded elements of panoramic roof | AH77.21-P-0001-01A | |
| Notes on safety-relevant components | AH00.00-Z-0019-01A |
- Cut back adhesive bead (1) at body flanges (3) using a scraper to a residual height of approx. 1 to 2 mm.
- Fully cut back residues of spacers (2) and adhesive bead (1) present in this area.
- Remove cutting residues at body flanges (3) using wet and dry vacuum cleaners.
- Repair paintwork damage at body flanges (3).
Use only primer filler approved by Daimler AG: http://xentryportal.i.daimler.com
- Apply primer in case of missing residual adhesive material in bonding area.
Apply primer only after primer has dried.
Otherwise the strength of the adhesive connection can be impaired and proper adhesion of the adhesive material is not ensured.
- Once primer has dried, glue new spacers (2) onto body flanges (3).