Cut Out Rear Fixed Element Of Panoramic Sliding Sunroof - AR77.21-P-0802-01ME
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2025 Mercedes-Benz Maybach GLS600, 2025 Mercedes-Benz GLS63 AMG, 2024 Mercedes-Benz Maybach GLS600, 2024 Mercedes-Benz GLS63 AMG, and 2023 Mercedes-Benz Maybach GLS600. However, it is still accessible from the selected car via links, so may be relevant.
Model 167.1/9
With Code 413 (Automatic panoramic sliding sunroof)
| Risk of injury from cutting wire tearing or becoming hot and from splinters of glass when cutting out bonded windows | Wear protective gloves and safety glasses. | AS67.00-Z-0004-01A | |
| Risk of injury due to snapping or warming up of cutting wire and due to splinters when cutting out glued panoramic roofs | Wear cut-proof gloves and safety glasses. | AS77.21-Z-0002-01A | |
| Topical note | Notes on removal/installation of windows | AH67.10-P-1000-02RT | |
| Topical note | Notes on removal/installation of bonded elements of panoramic roof | AH77.21-P-0001-01A | |
| Notes on safety-relevant components | AH00.00-Z-0019-01A |
- Cut through front adhesive bead (1 a) from center outwards arrows "A", using cutting wire.
Cover adjacent paint surfaces with
set of shields when cutting.
Otherwise paint can be damage by cutting wire.
Helper required.
- To reach the rear adhesive bead (1 b) during cutting towards the rear "arrows C" guide cutting wire in area of (B) from outside under rear sliding sunroof frame segment (3).
- Slightly separate front sliding sunroof frame segment (2) and rear sliding sunroof frame segment (3) from each other in area "K" using a suitable wedge and guide inner end of cutting wire(S) in between.
Paint can otherwise be damaged by cutting wire(S).
- Further guide cutting wire out of front adhesive bead (1a) in direction of arrow "C" and fully cut through rear adhesive bead (1b).
Paint can otherwise be damaged by cutting wire(S).
- Remove rear fixed element (3) from vehicle.