Cut Out Front Fixed Element Of Panoramic Sliding Sunroof - AR77.21-P-0803-01ME
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2025 Mercedes-Benz Maybach GLS600, 2025 Mercedes-Benz GLS63 AMG, 2024 Mercedes-Benz Maybach GLS600, 2024 Mercedes-Benz GLS63 AMG, and 2023 Mercedes-Benz Maybach GLS600. However, it is still accessible from the selected car via links, so may be relevant.
Model 167 With Code 413 (Panoramic sliding sunroof/glass roof)
| Risk of injury from cutting wire tearing or becoming hot and from splinters of glass when cutting out bonded windows | Wear protective gloves and safety glasses. | AS67.00-Z-0004-01A | |
| Risk of injury due to snapping or warming up of cutting wire and due to splinters when cutting out glued panoramic roofs | Wear cut-proof gloves and safety glasses. | AS77.21-Z-0002-01A | |
| Topical note | Notes on removal/installation of windows | AH67.10-P-1000-02RT | |
| Topical note | Notes on removal/installation of bonded elements of panoramic roof | AH77.21-P-0001-01A |
- Saw off an approx. 5 mm to 10 mm wide strip at front left and right transverse side of front fixed element (4).
Saw carefully.
Otherwise the windshield may be damaged.
Otherwise, front panoramic sliding sunroof frame can be damaged.
Use oscillating saw with round sawing blade.
- Saw off an approx. 5 mm to 10 mm wide strip at front left and right longitudinal side of front fixed element (4).
Otherwise, front panoramic sliding sunroof frame can be damaged.
- Cut through adhesive bead using cutting wire.
set of shields when cutting.
Otherwise paint can be damage by cutting wire.
- Remove front fixed element (4) from panoramic sliding sunroof frame.
Helper required.