Prepare Adhesive Cartridge For Panoramic Roof - AR77.21-P-1000-01A

WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.

Model all (CAR, smart)

Topical note

Notes on removal/installation of bonded elements of panoramic roof

AH77.21-P-0001-01A

Fig 1: Identifying Adapter (000 589 86 63 00)

Courtesy of MERCEDES-BENZ USA

Remove cartridge from repair kit and heat in cartridge preheater.
Screw application nozzle of repair kit onto cartridge.
Insert adapter and cartridge into squeeze gun.
Adhesive material can be pressed out with a commercially available electric squeeze gun or a pneumatic squeeze gun with piston rod.

To press out cartridge completely, adapter must be inserted between piston of cartridge and plate on push rod of squeeze gun.