Wiring Diagram For The Radar Sensors Control Unit - PE30.30-P-2102FBA
WARNING: This page is about a different car, the 2023 Mercedes-Benz GLC300, 2022 Mercedes-Benz GLC300, 2021 Mercedes-Benz GLC300, 2020 Mercedes-Benz GLC350e, and 2020 Mercedes-Benz GLC300. However, it is still accessible from the selected car via links, so may be relevant.
Engine 177, 274, 276, 626, 651 in model 205
up to model year 2019
with code 233 (DISTRONIC PLUS)
Control unit N62/1
Engine 177, 274, 276, 642, 651 in model 253 (except 253.99)
up to model year 2020
with code 233 (DISTRONIC PLUS)
Control unit N62/1
| Radar sensors control unit wiring diagram | PE30.30-P-2102-97FBA | ||
| Abbreviations of signal and circuit designations for wiring diagrams | OV00.01-P-1001-28FBA | ||
| Use of wiring diagrams | OV00.01-P-1901-03FBA | ||
| Search aid for all electrical components | OV00.01-P-1909FBA | ||
| Location and assignment of line and plug connectors | GF00.19-P-1000FBA | ||
| Location and assignment of ground points | GF00.19-P-2000FBA | ||
| Location and assignment of Z connector sleeves (wiring and plug connectors in wiring harness) | GF00.19-P-3000FBA |