Cross Member And Front Reinforcement - BA62.30-P-1000-01H
WARNING: This page is about a different car, the 2023 Mercedes-Benz C300, 2022 Mercedes-Benz C300, 2021 Mercedes-Benz C300, 2020 Mercedes-Benz C300, and 2019 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.
Model 205, 213, 238, 253, 257, 290, 293
CROSS MEMBER AND FRONT REINFORCEMENT MODIFICATION NOTES (Model 213)
| 28.05.2020 | Value changed: Bolt, strut to soundproofing | Model 213 |
CROSS MEMBER AND FRONT REINFORCEMENT (Model 205, 213)
| Number | Designation | Model 205 | Model 213 | ||||
|---|---|---|---|---|---|---|---|
| BA62.30-P-1001-01H | Bolt, cross member to soundproofing | M10 | Stage 1 | Left side | Nm | 28 | 28 |
| Right side | Nm | 28 | 35 | ||||
| Stage 2 | ∠° | 135 | 135 | ||||
| BA62.30-P-1002-01H | Bolt, headlamp support to cross member | M6 | Nm | 10 | 8 | ||
| BA62.30-P-1003-01H | Bolt, strut to cross member | M8 | Nm | 20 | 20 | ||
| BA62.30-P-1004-01H | Bolt, strut to soundproofing | M8 | Nm | 20 | 20 | ||
| BA62.30-P-1005-01H | Bolt, insulation to longitudinal member | M12 | Stage 1 | Nm | 90 | 90 | |
| Stage 2 | ∠° | 90 | 90 | ||||
| BA62.30-P-1006-01H | Bolt, soundproofing to front axle carrier | M8 | Nm | 23 | 23 | ||
| BA62.30-P-1007-01H | Screw, front module carrier/cross strut to body/angle bracket for front module carrier | Nm | 11 | 11 | |||
| BA62.30-P-1008-01H | Bolt, lock striker to cross member/front-module carrier | Nm | 10 | 10 | |||
| BA62.30-P-1010-01H | Bolt, front module carrier to cross member | M6 | Nm | 3 | 8 | ||
| BA62.30-P-1011-01H | Screw, cross strut/crossmember to holder | M8 | Nm | - | - | ||
| BA62.30-P-1012-01H | Screw, front mounting support to rear mounting support | Nm | - | - | |||
| BA62.30-P-1013-01H | Screw, rear mounting support to crossmember | Nm | - | - | |||
| BA62.30-P-1014-01H | Screw, rear mounting support to assembly carrier | Nm | - | - | |||
| BA62.30-P-1015-01H | Screw, strut to reinforcement | M8 | Nm | 23 | - | ||
| BA62.30-P-1016-01H | Screw, strut to reinforcement plate/front module carrier | M8 | Nm | - | 15 | ||
| BA62.30-P-1017-01H | Screw, hood catch lower part to reinforcement plate/front module carrier | M6 | Nm | - | - | ||
| BA62.30-P-1018-01H | Nut, radar sensor to holder | Nm | - | 7 | |||
| BA62.30-P-1019-01H | Screw, radar sensor holder to crossmember/mounting support/air management control | Nm | - | 4 | |||
| BA62.30-P-1020-01H | Screw, front air regulation system to front module mounting support | M6 | Nm | - | 5 | ||
| BA62.30-P-1021-01H | Screws, cross strut to reinforcement | Nm | - | 11 | |||
| BA62.30-P-1022-01H | Screw, crossmember to mounting support | Nm | - | 7 | |||
CROSS MEMBER AND FRONT REINFORCEMENT (Model 238, 253)
| Number | Designation | Model 238 | Model 253 | ||||
|---|---|---|---|---|---|---|---|
| BA62.30-P-1001-01H | Bolt, cross member to soundproofing | M10 | Stage 1 | Left side | Nm | 28 | 28 |
| Right side | Nm | 35 | 35 | ||||
| Stage 2 | ∠° | 135 | 135 | ||||
| BA62.30-P-1002-01H | Bolt, headlamp support to cross member | M6 | Nm | 8 | 8 | ||
| BA62.30-P-1003-01H | Bolt, strut to cross member | M8 | Nm | 20 | 20 | ||
| BA62.30-P-1004-01H | Bolt, strut to soundproofing | M8 | Nm | 23 | 20 | ||
| BA62.30-P-1005-01H | Bolt, insulation to longitudinal member | M12 | Stage 1 | Nm | 90 | 90 | |
| Stage 2 | ∠° | 90 | 90 | ||||
| BA62.30-P-1006-01H | Bolt, soundproofing to front axle carrier | M8 | Nm | 23 | 23 | ||
| BA62.30-P-1007-01H | Screw, front module carrier/cross strut to body/angle bracket for front module carrier | Nm | 11 | 11 | |||
| BA62.30-P-1008-01H | Bolt, lock striker to cross member/front-module carrier | Nm | 10 | 10 | |||
| BA62.30-P-1010-01H | Bolt, front module carrier to cross member | M6 | Nm | 8 | 3 | ||
| BA62.30-P-1011-01H | Screw, cross strut/crossmember to holder | M8 | Nm | - | 20 | ||
| BA62.30-P-1012-01H | Screw, front mounting support to rear mounting support | Nm | - | 8 | |||
| BA62.30-P-1013-01H | Screw, rear mounting support to crossmember | Nm | - | 3 | |||
| BA62.30-P-1014-01H | Screw, rear mounting support to assembly carrier | Nm | - | 7 | |||
| BA62.30-P-1015-01H | Screw, strut to reinforcement | M8 | Nm | - | - | ||
| BA62.30-P-1016-01H | Screw, strut to reinforcement plate/front module carrier | M8 | Nm | - | 23 | ||
| BA62.30-P-1017-01H | Screw, hood catch lower part to reinforcement plate/front module carrier | M6 | Nm | - | 11 | ||
| BA62.30-P-1018-01H | Nut, radar sensor to holder | Nm | 7 | 8 | |||
| BA62.30-P-1019-01H | Screw, radar sensor holder to crossmember/mounting support/air management control | Nm | 4 | 8 | |||
| BA62.30-P-1020-01H | Screw, front air regulation system to front module mounting support | M6 | Nm | - | - | ||
| BA62.30-P-1021-01H | Screws, cross strut to reinforcement | Nm | - | - | |||
| BA62.30-P-1022-01H | Screw, crossmember to mounting support | Nm | - | - | |||
CROSS MEMBER AND FRONT REINFORCEMENT (Model 257, 290)
| Number | Designation | Model 257 | Model 290 | ||||
|---|---|---|---|---|---|---|---|
| BA62.30-P-1001-01H | Bolt, cross member to soundproofing | M10 | Stage 1 | Left side | Nm | 28 | 28 |
| Right side | Nm | 35 | 35 | ||||
| Stage 2 | ∠° | 135 | 135 | ||||
| BA62.30-P-1002-01H | Bolt, headlamp support to cross member | M6 | Nm | 10 | 10 | ||
| BA62.30-P-1003-01H | Bolt, strut to cross member | M8 | Nm | 20 | 20 | ||
| BA62.30-P-1004-01H | Bolt, strut to soundproofing | M8 | Nm | 20 | 20 | ||
| BA62.30-P-1005-01H | Bolt, insulation to longitudinal member | M12 | Stage 1 | Nm | 90 | 90 | |
| Stage 2 | ∠° | 90 | 90 | ||||
| BA62.30-P-1006-01H | Bolt, soundproofing to front axle carrier | M8 | Nm | 20 | 23 | ||
| BA62.30-P-1007-01H | Screw, front module carrier/cross strut to body/angle bracket for front module carrier | Nm | 11 | 11 | |||
| BA62.30-P-1008-01H | Bolt, lock striker to cross member/front-module carrier | Nm | 10 | 10 | |||
| BA62.30-P-1010-01H | Bolt, front module carrier to cross member | M6 | Nm | 8 | 8 | ||
| BA62.30-P-1011-01H | Screw, cross strut/crossmember to holder | M8 | Nm | - | - | ||
| BA62.30-P-1012-01H | Screw, front mounting support to rear mounting support | Nm | - | - | |||
| BA62.30-P-1013-01H | Screw, rear mounting support to crossmember | Nm | - | - | |||
| BA62.30-P-1014-01H | Screw, rear mounting support to assembly carrier | Nm | - | - | |||
| BA62.30-P-1015-01H | Screw, strut to reinforcement | M8 | Nm | - | - | ||
| BA62.30-P-1016-01H | Screw, strut to reinforcement plate/front module carrier | M8 | Nm | - | - | ||
| BA62.30-P-1017-01H | Screw, hood catch lower part to reinforcement plate/front module carrier | M6 | Nm | - | - | ||
| BA62.30-P-1018-01H | Nut, radar sensor to holder | Nm | - | 8 | |||
| BA62.30-P-1019-01H | Screw, radar sensor holder to crossmember/mounting support/air management control | Nm | - | 8 | |||
| BA62.30-P-1020-01H | Screw, front air regulation system to front module mounting support | M6 | Nm | - | - | ||
| BA62.30-P-1021-01H | Screws, cross strut to reinforcement | Nm | - | - | |||
| BA62.30-P-1022-01H | Screw, crossmember to mounting support | Nm | - | - | |||
CROSS MEMBER AND FRONT REINFORCEMENT (Model 293)
| Number | Designation | Model 293 | ||||
|---|---|---|---|---|---|---|
| BA62.30-P-1001-01H | Bolt, cross member to soundproofing | M10 | Stage 1 | Left side | Nm | 28 |
| Right side | Nm | 35 | ||||
| Stage 2 | ∠° | 135 | ||||
| BA62.30-P-1002-01H | Bolt, headlamp support to cross member | M6 | Nm | 10 | ||
| BA62.30-P-1003-01H | Bolt, strut to cross member | M8 | Nm | 20 | ||
| BA62.30-P-1004-01H | Bolt, strut to soundproofing | M8 | Nm | 23 | ||
| BA62.30-P-1005-01H | Bolt, insulation to longitudinal member | M12 | Stage 1 | Nm | 90 | |
| Stage 2 | ∠° | 90 | ||||
| BA62.30-P-1006-01H | Bolt, soundproofing to front axle carrier | M8 | Nm | 23 | ||
| BA62.30-P-1007-01H | Screw, front module carrier/cross strut to body/angle bracket for front module carrier | Nm | 11 | |||
| BA62.30-P-1008-01H | Bolt, lock striker to cross member/front-module carrier | Nm | 10 | |||
| BA62.30-P-1010-01H | Bolt, front module carrier to cross member | M6 | Nm | 3 | ||
| BA62.30-P-1011-01H | Screw, cross strut/crossmember to holder | M8 | Nm | 20 | ||
| BA62.30-P-1012-01H | Screw, front mounting support to rear mounting support | Nm | - | |||
| BA62.30-P-1013-01H | Screw, rear mounting support to crossmember | Nm | - | |||
| BA62.30-P-1014-01H | Screw, rear mounting support to assembly carrier | Nm | - | |||
| BA62.30-P-1015-01H | Screw, strut to reinforcement | M8 | Nm | - | ||
| BA62.30-P-1016-01H | Screw, strut to reinforcement plate/front module carrier | M8 | Nm | - | ||
| BA62.30-P-1017-01H | Screw, hood catch lower part to reinforcement plate/front module carrier | M6 | Nm | - | ||
| BA62.30-P-1018-01H | Nut, radar sensor to holder | Nm | 7 | |||
| BA62.30-P-1019-01H | Screw, radar sensor holder to crossmember/mounting support/air management control | Nm | 5 | |||
| BA62.30-P-1020-01H | Screw, front air regulation system to front module mounting support | M6 | Nm | - | ||
| BA62.30-P-1021-01H | Screws, cross strut to reinforcement | Nm | - | |||
| BA62.30-P-1022-01H | Screw, crossmember to mounting support | Nm | ||||