Remove/Install Panoramic Sunroof Roller Sun Blind Drive Cable - AR77.21-P-0230NKA
WARNING: This page is about a different car, the 2023 Mercedes-Benz C300, 2022 Mercedes-Benz C300, 2021 Mercedes-Benz C300, 2020 Mercedes-Benz C300, and 2019 Mercedes-Benz C300. However, it is still accessible from the selected car via links, so may be relevant.
Model 117, 156, 176
with code 413 (Automatic Panoramic Sliding Sunroof)
Model 205.0/1/2/3
with code 413 (Automatic Panoramic Sliding Sunroof)
Model 213
with code 413 (Automatic Panoramic Sliding Sunroof)
Model 222
with code 398 (Panoramic Roof With MAGIC SKY CONTROL)
Model 222
with code 413 (Automatic Panoramic Sliding Sunroof)
Model 238
with code 413 (Automatic Panoramic Sliding Sunroof)
Model 253
with code 413 (Automatic Panoramic Sliding Sunroof)
Shown on Model 176
Fig 1: Panoramic Sunroof Roller Sun Blind Drive Cable Components Location - Model 205.0/3 With Code 413 (Shown On Model 176)
| Remove/Install | |||
| 1 | Remove panoramic sliding roof roller sun blind motor | Model 117, 156, 176, 205.0/1/2/3, 222, 253 with code 413 (Automatic Panoramic Sliding Sunroof) | AR77.21-P-0490NKA |
| Model 222 with code 398 (Panoramic Roof With MAGIC SKY CONTROL) Model 213 with code 413 (Automatic Panoramic Sliding Sunroof) |
AR77.21-P-0490LWE | ||
| Model 238.3 with code 413 (Automatic Panoramic Sliding Sunroof) | AR77.21-P-0490LWO | ||
| 2 | Remove roller sunblind of panoramic Sliding Sunroof | Model 156, 205.0/1/2/3, 238, 253 with code 413 (Automatic Panoramic Sliding Sunroof) | AR77.21-P-0200NKX |
| Model 117, 176 with code 413 (Automatic Panoramic Sliding Sunroof) | AR77.21-P-0215NKA | ||
| Model 222 with code 398 (Panoramic Roof With MAGIC SKY CONTROL) Model 222 with code 413 (Automatic Panoramic Sliding Sunroof) |
AR77.21-P-0200LF | ||
| Model 213 with code 413 (Automatic Panoramic Sliding Sunroof) | AR77.21-P-0200LWE | ||
| 3 | Using an assembly wedge, push support(2) of left and right drive cable (1) toward rear out of guide rail(3) | Long wedge |
Fig 2 |
| 4 | Manually pull drive cable (1) toward rear out of guide rail (3) | : Guide drive cable (1) through guide rail (3) up to end stop. Then fully install drive cable (1) in front area. |
|
| 5 | Install in the reverse order |