Remove/Install Bottom Parts Of Soundproofing - AR94.30-P-5300W

WARNING: This page is about a different car, the 2020 Mercedes-Benz SLC43 AMG, 2019 Mercedes-Benz SLC43 AMG, 2018 Mercedes-Benz SLC43 AMG, and 2017 Mercedes-Benz SLC43 AMG. However, it is still accessible from the selected car via links, so may be relevant.

MODEL 172.4

diesel engine

Courtesy of MERCEDES-BENZ USA

Picture item, etc.	Work instructions
	Risk of death caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.	AS00.00-Z-0010-01A
	Raise vehicle with vehicle lift		AR00.60-P-1000V
1	Middle bottom section of soundproofing	Vehicle without code (481) Underride guard Unscrew bolts (3) and remove center bottom section of soundproofing (1). Rechargeable drill/screwdriver
2	Underride guard plate	Vehicles with code (481) Underride guard Unscrew bolts (3) underride guard plate (2). Rechargeable drill/screwdriver
			*BA61.40-P-1001-01D
4	Front bottom section of soundproofing	On vehicles without code (481) Underride guard; first remove center bottom section of soundproofing (1). On vehicles with code (481) Underride guard; first remove underride guard plate (2). Unscrew bolts (5) and remove front bottom section of soundproofing (4). Rechargeable drill/screwdriver
	Rear soundproofing bottom section	On vehicles without code (481) Underride guard; first remove center bottom section of soundproofing (1). On vehicles with code (481) Underride guard; first remove underride guard plate (2). Unscrew bolts (7) and remove rear bottom section of soundproofing (6). Rechargeable drill/screwdriver

UNDERBODY PROTECTION

Number	Designation		Model 172 with code 481
BA61.40-P-1001-01D	Bolt, underbody protection plate	Nm	17