Prepare Front Glass Cover Body Flange For Installation - AR77.21-P-7010-02NKA
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2023 Mercedes-Benz C43 AMG, 2022 Mercedes-Benz C43 AMG, 2021 Mercedes-Benz C43 AMG, 2020 Mercedes-Benz C43 AMG, and 2019 Mercedes-Benz C43 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 117, 156, 176, 205, 222, 253 with code 413 (Automatic panoramic sliding sunroof)
Model 222 with code 398 (Panoramic roof with MAGIC SKY CONTROL)
| Notes on removal/installation of bonded elements of panoramic roof | AH77.21-P-0001-01A |
MODIFICATION NOTES
| 18.04.2018 | Notes on removal/installation of bonded elements of panoramic roof added. |
Shown on MODEL 176
- Cut back adhesive beads on bonding surfaces (1) to residual height of approx. 1 mm to max. 2 mm and pull off incompletely cut off residual sections of adhesive beads.
Max. 2 mm of adhesive beads may remain in place.
- Check panoramic sliding sunroof frame (2) for paint damage.
If there is a problem,
repair paint damage on panoramic sliding sunroof frame (2).
- Apply primer onto bonding surfaces (1).
Only on bonding surfaces (1) on which no residual adhesive material is present.