Blind Spot Assist Wiring Diagram - PE54.71-P-2100-97FBA
Model 205
up to model year 2019
with code 234 (Blind Spot Monitoring)
Radar sensor B92/6, B92/11
Model 253 (except 253.99)
up to model year 2020
with code 234 (Blind Spot Monitoring)
Radar sensor B92/6, B92/11
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Use of wiring diagrams | 23L |
| B92/11 | Left outer rear bumper integrated radar sensor | 4A |
| B92/11 | Left outer rear bumper integrated radar sensor | 17A |
| B92/11 | Left outer rear bumper integrated radar sensor | 11A |
| B92/6 | Right outer rear bumper integrated radar sensor | 21A |
| CAN PER | Peripherals CAN | 8K |
| K40/5 | Rear fuse and relay module | 4L |
| K40/5f452 | Fuse 452 | 3L |
| U1253 | Valid for model 253 | 11H |
| W3/8 | Right rear wheel well ground point | 14L |
| X26/40 | Rear frame floor assembly/bumper electrical connector | 2H |
| X30/27 | Peripherals CAN (CAN PER) potential distributor electrical connector | 8L |
| Z36/17z1 | Rear sensor CAN (low) connector sleeve | 19F |
| Z36/19z1 | Rear sensor CAN (high) connector sleeve | 17F |
| Z36/35z1 | Rear bumper circuit 15 connector sleeve | 2E |
| Z36/36z1 | Rear bumper circuit 31 connector sleeve | 16L |