LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> GLC300 Base >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Electrical System, Equipment & Instruments - 253 Chassis 2 Of 9 >> Basic Knowledge >> Upper Control Panel Control Unit, Component Description - GF54.21-P-6040RF

Upper Control Panel Control Unit, Component Description - GF54.21-P-6040RF

Model 205 

Model 253 

Shown on Model 205.0 with transmission 722 

Fig 1: Upper Control Panel Control Unit Components Location - Model 253 (Shown On Model 205.0)
G14201090Courtesy of MERCEDES-BENZ USA

Location 

The upper control panel control unit is located in the center in the instrument panel above the center console.

Tasks 

The upper control panel control unit forwards the signals of the integrated control elements and actuates the integrated display elements for function feedback. On vehicles with CODE 522 (Audio 20 radio) or CODE 531 (COMAND® APS), the upper control panel control unit enables access to the CD or DVD drive on the head unit (A26/17). The upper control panel control unit sends and receives signals and requests over the LCP-LIN (LIN A3). The flashing indicator in the hazard warning lights button (N72/1s57) is actuated by the front SAM control unit (N10/6) over a direct line.

Shown with transmission 716, not valid for Model 253 (except 253.99) as of 01.06.2019 

G14201091Courtesy of MERCEDES-BENZ USA

Shown on Model 253 (except 253.99) as of 01.06.2019 

G14201092Courtesy of MERCEDES-BENZ USA

Structure 

The following control elements are located in the upper control panel control unit (except Model 253 (except 253.99) as of 01.06.2019):

In Model 253 (except 253.99) as of 01.06.2019, the following control elements are located in the upper control panel control unit:

The following display elements are located in the upper control panel control unit:

Variants 

The number of buttons and display elements in the upper control panel control unit is dependent on the type and code conditions listed in the "Design" chapter. The location of the buttons in the upper control panel control unit is dependent on the type of transmission (automatic transmission or manual transmission).

  Wiring diagram for upper control panel control unit Model 205 up to Model year 2019 Model 253 (except 253.99) up to Model year 2020 PE54.21-P-2119-97FBA
    Model 205 as of Model year 2019 PE54.21-P-2119-97FBB
    Model 253 (except 253.99) as of Model year 2020 Model 253.99 PE54.21-P-2119-97FCA