Retrofit WLAN Antenna For COMAND® Online Incl. DVD Changer - AN82.85-P-0008-05LWG

Model 253.3/9 

The following work procedure is shown on a left-hand drive vehicle; the work procedure may deviate on right-hand drive vehicles.

1. Clip WLAN antenna (A2/83) into bracket (arrow).

   The bracket is located on the cross member behind the instrument panel.

2. Route antenna line (2) along cross member to device installation frame of head unit and fix in place with cable ties.

   The antenna line (2) is connected to the head unit at a later point.

   Courtesy of MERCEDES-BENZ USA