Retrofit CA Module Card Reader - AZ82.60-P-0032LWG

Model 253 (except 253.992/993) 

with code 197 (DVB-T2 conversion with ext. card reader/HD-TV Korea) 

with code 865 (digital TV) 

except code 835 (South Korea version) 

Shown on Model 253.9 except code ME05 (HYBRID-DRIVE 80KW-VARIANT (INCLUDING PLUGIN)) 

Courtesy of MERCEDES-BENZ USA

Shown on model 253.9 (with CODE ME05 (HYBRID DRIVE 80KW-VARIANT (INCLUDING PLUG-IN))) 

Courtesy of MERCEDES-BENZ USA

	Risk of injury  caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof.	No parts of the body or limbs should be within the operating area when the components are moving.	AS00.00-Z-0011-01A
	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Notes on HANDS-FREE ACCESS		AH80.61-P-0001-01A
	Remove
1	Remove right side cargo space paneling and cargo space recess paneling
			AR68.30-P-1180LWG
	Install
2	Install electrical wiring set for card reader CA-module (1)	Model 253 except code ME05 (HYBRID-DRIVE 80KW-VARIANT (INCLUDING PLUGIN))	AZ82.60-P-0032-01LWG
		Model 253 with code ME05 (HYBRID DRIVE, 80KW VARIANT (INCLUDING PLUG-IN))	AZ82.60-P-0032-01LWH
3	Retrofit holder for card reader CA-module (1)	Model 253 except code ME05 (HYBRID-DRIVE W-VARIANT (INCLUDING PLUGIN)) 80K	AZ82.60-P-0032-02LWG
		Model 253 with code ME05 (HYBRID DRIVE, 80KW VARIANT (INCLUDING PLUG-IN))	AZ82.60-P-0032-02LWH
4	Position cargo space recess paneling in cargo space, making sure to guide the electrical wiring set for card reader CA-module (1) through previously drilled hole
5	Prepare contacting of electrical wiring set on card reader CA-module (1) for TV tuner
6	Fasten card reader CA-moduel (1) to holder for card reader CA-module (1)
7	Install right side cargo space paneling and cargo space recess paneling
			AR68.30-P-1180LWG
	Update Vehicle Documentation (VeDoc)
8	Enter special equipment in on-line vehicle data card	Code 381 (CI+BOX card reader fur DVB T2-Standard)
9	Note; card reader CA module according to AZ82.60-P-0032LWG retrofitted; Refer to KG 82 under external organization texts
10	Connect diagnostic system and select vehicle via the vehicle identification number (VIN)
			AD00.00-P-2000-04B
11	Carry out variant coding using software calibration number (SCN)	TV tuner
		Card reader CA-module (1) can only be operated within a temperature range from Ø to 50°C. Card reader CA-module (1) switches off automatically beyond this temperature range.
12	Disconnect diagnostic system
			AD00.00-P-2000-04B
	Check
13	Perform function test