Retrofit Adaptive Highbeam Assist Plus - AN82.10-P-0011LWG

Model 253.### 1# 

with code 238 (Active lane keeping Assist) 

with code 642 (Headlamps, LED, dynamic, right-side traffic) 

Model 253.### 1# 

with code 476 (Lane keeping assist) 

with code 642 (Headlamps, LED, dynamic, right-side traffic) 

Model 253.### 1# 

with code 513 (Speed Limit Assist) 

with code 642 (Headlamps, LED, dynamic, right-side traffic) 

Model 253.### 2# 

with code 238 (Active lane keeping Assist) 

with code 641 (Headlamps, LED, dynamic, left-side traffic) 

Model 253.### 2# 

with code 476 (Lane keeping assist) 

with code 641 (Headlamps, LED, dynamic, left-side traffic) 

Model 253.### 2# 

with code 513 (Speed Limit Assist) 

with code 641 (Headlamps, LED, dynamic, left-side traffic) 

	Update Vehicle Documentation (VeDoc)
1	Enter special equipment into the on-line vehicle data card	Code 628 (Adaptive Highbeam Assist Plus)
2	Attach note Adaptive Highbeam Assist retrofitted as per AN82.10-P-0011LWG under field organization texts to design group 54 and design group 82
3	Connect diagnostic system and select vehicle using FIN
			AD00.00-P-2000-04B
4	Carry out variant coding using software calibration number (SCN)	Central gateway (CGW)  Signal acquisition and actuation module (SAM)  Multifunction camera (MFK)  Instrument cluster (KI)  Headlamp (SW)  Chassis gateway (FWGW)
5	Disconnect diagnostic system
			AD00.00-P-2000-04B
	Check
6	Perform function test	See owner's manual.

Part no.	Designation	Quantity
KG 99 (see EPC)	Parts kit for automatic high beam control Plus software retrofit	1