Remove/Install Loudspeaker In Instrument Panel - AR82.62-P-7833LW
Model 205, 253
Shown on model 205
| Remove/install | |||
| 1 | Switch off ignition and remove transmitter key | ||
| 2 | Unclip cover (1) at instrument panel (2) (arrows) | Fig 2 | |
| 3 | Pull center instrument panel speaker (H4/27) upwards out of mount in instrument panel (2) until electrical connector (3) is accessible | ||
| 4 | Disconnect electrical connector (3) and remove center instrument panel speaker (H4/27) | ||
| 5 | Install in the reverse order |