Remove/Install Contact Plate For Cell Phone Holder (UPCI (UHI)) In The Armrest - AR82.70-P-8919LW
Model 205, 213, 238, 253
with code 386 (Comfort telephony)
Fig 1: Contact Plate For Cell Phone Holder (UPCI (UHI)) In The Armrest Components Location - Model 253 With Code 386 (Shown On Model 205)
Shown on model 205
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Remove rear center console covering (1) | AR68.20-P-2358LW | |
| 2 | Disconnect electrical connections (4, 5) | ||
| 3 | Unhook electrical lines (3) at center console (2) | ||
| 4 | Remove bolt (6) | ||
| 5 | Remove cover (7) with mobile phone contact plate (X237/1) from center console (2) and at the same time pull electrical lines (3) out of center console (2) | ||
| 6 | Unhook electrical lines (3) at cover (7) | ||
| 7 | Unscrew bolt (8) | ||
| 8 | Remove mobile phone contact plate (X237/1) from cover (7) | ||
| 9 | Install in the reverse order |