Tighten Alternator Screws/Bolts - AR15.40-P-0002-01MFA
Engine 260, 282, 608
Engine 654 in model 118, 177, 247
MODIFICATION NOTES
| 14.10.2019 | Bolt, alternator to major assembly carrier/crankcase | BA15.40-P-1001-01V | |
| 14.10.2019 | Screw, alternator to major assembly carrier/oil filter | BA15.40-P-1004-01Q |
ALTERNATOR
| Number | Designation | Engine 282 | ||
|---|---|---|---|---|
| BA15.40-P-1001-01V | Bolt, alternator to major assembly carrier/crankcase | Stage 1 | Nm | 8 |
| Stage 2 | Nm | 20 | ||
ALTERNATOR
| Number | Designation | Engine 260 | Engine 608 | ||
|---|---|---|---|---|---|
| BA15.40-P-1001-01W | Screw, alternator to timing case/major assembly carrier | Stage 1 | Nm | 8 | 8 |
| Stage 2 | Nm | 20 | 20 | ||
ALTERNATOR
| Number | Designation | Engine 654 in model 118, 177, 247 | ||
|---|---|---|---|---|
| BA15.40-P-1004-01Q | Screw, alternator to major assembly carrier/oil filter | Stage 1 | Nm | 8 |
| Stage 2 | Nm | 20 | ||
It is absolutely essential to follow the tightening sequence.
- Tighten the upper and lower screw of the alternator slightly be hand.
- Tighten the top screw of the alternator to stage 1.
Engine 282
Engine 654 in model 118, 177, 247
Engine 608
- Tighten the bottom screw of the alternator to stage 1.
Engine 260
Engine 608
Engine 282
- Tighten the top screw of the alternator to stage 2.
Engine 260
Engine 608
- Tighten the bottom screw of the alternator to stage 2.
Engine 260
Engine 608