000 588 16 82 00 Filling Unit - WS25.00-P-0038B

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model All (4xWD, CAR, Heavy transporter, Light transporter, smart)

Use in FG 25/26/33/42/43/Set B

Purpose:

Filler/bleeder unit for filling, flushing and bleeding brake and clutch systems.

Procurement information:

This workshop appliance is not sold through the regular replacement part ordering process in GLC/LC, but instead directly through the manufacturer/supplier. Recommended workshop equipment and information about the manufacturers/supplier are available in the maintenance system document (see below).

Courtesy of MERCEDES-BENZ USA

NOTE: Please observe the manufacturer specific accessories.

Manufacturer 1

GL-GmbH Werkstatttechnik

Nurtinger Strasse 23-25

72636 Frickenhausen, Germany

Germany

https://gl-gmbh.de

Type/Model: Perfecta 20 MB Article no.: 900.021.000
Type/Model: Perfecta 20 Plus Article no.: 901.920.000
Type/Model: Perfecta 60 Article no.: 900.060.000
Model: Perfecta 60 Plus Article no.: 901.960.000
Accessories: Adapter set ACTROS-HPS1/EAS Article no.: 800600

Manufacturer 2

ROMESS Rogg Apparate + Electronic GmbH & Co. KG

Dickenhardtstrasse 67

78054 VS- Schwenningen

Germany

http://www.romess.de

Type/model: Romess S 15 Article no.: 1015
Type/model: Romess S 30-60 Article no.: 1322
Type/model: Romess SE 30-60 Article no.: 1333
Model: Romess SE 30-60 A10 RoTWIN Article no.: 1340
Accessories: Adapter set ACTROS-HPS1/EAS Article number: 50400