Open And Close Coupling - AR09.41-P-1311-01AL
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Engine 133, 139, 152, 156, 157, 176, 177, 178, 254, 256, 260, 264, 266, 270, 271, 272, 273, 274, 275, 276, 277, 278, 279, 282, 607, 608, 626, 629, 640, 642, 646, 651, 654, 656, 780
Shown on variant 1
Open clutch
- Slide nose (2) of catch spring (3) to position (B).
Never pull on the eyelet (1).
The catch spring (3) will lose its pretension otherwise.
- Detach hose from component part.
- Check sealing ring for damage.
If damage is present,
↓
Replace hose.
Close clutch
- Slide nose (2) of catch spring (3) to position (A).
- Slide hose onto component until the catch spring (3) latches.
Ensure connections are clean and free of grease.
- Check connection by pulling a little at the hose.
Shown on variant 2