Lower Engine Compartment Lining Remove And Install - Ar61.20-P-1105MFR
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 118, 177, 247 with engine 260
with code M016 (Uprated engine)
Model 118, 177, 247.7 with engine 139
MODIFICATION NOTES
| 17.05.2022 | Remove screws (11). | Added in operation step variant 5.2. |
Shown on model 177 with engine 260 with code M016 (performance-enhanced engine)
Shown on model 177 with engine 139
| Risk of injury from engine start by remote start function | Prior to starting work, open engine hood, do not reach into rotation range or hazard area of freely rotating parts, wear closed and snug-fitting work clothes | AS00.00-Z-0024-01A | |
| Preparatory tasks | |||
| 1 | Open hood. | Vehicles with remote start function. | |
| 2 | Lift vehicle with lifting platform. | AR00.60-P-1006A | |
| Remove front engine compartment paneling (1) | |||
| 3 | Remove bolts (4). | the vehicle equipment. |
|
| 4 | Release right front wheel spoiler (8) and left front wheel spoiler (9) from left and right front wheel arch liner and remove. | Model 118, 177, 247 with engine 260 with code M016 (Uprated engine) | |
| 5.1 | Remove retaining clips (3). | Model 118, 177, 247.7 with engine 139 | |
| Fig 1 | |||
| 5.2 | Remove screws (11). | Model 118, 177, 247 with engine 260 with code M016 (Uprated engine) |
|
| 6 | Remove screws (5). | *BA61.20-P-1001-01B | |
| 7 | Pull front engine compartment lining (1) out of front bumper and remove. | ||
| 8 | Install in the reverse order. | ||
| Remove rear engine compartment paneling (2) | |||
| 9 | Remove screws (6). | *BA61.20-P-1001-01B | |
| 10 | Remove screws (5). | *BA61.20-P-1001-01B | |
| 11 | Remove screws (7). | *BA61.20-P-1001-01B | |
| 12 | Remove rear engine compartment lining (2). | ||
| 13 | Install in the reverse order. | ||
| Concluding tasks | |||
| 14 | Lower vehicle with vehicle lift. | AR00.60-P-1006A | |
| 15 | Close hood. | Vehicles with remote start function. |
LOWER ENGINE COMPARTMENT PANELING
| Number | Designation | Model 118, 177, 247 | |
|---|---|---|---|
| BA61.20-P-1001-01B | Bolt, mounting rail in lower engine compartment lining (front) to frame | Nm | 17 |