Remove/Install Engine Covers - AP01.10-P-2405-01K
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Engine 139 in model 118, 177, 247
Shown on engine 139 in model 177.053
Shown on engine cover of engine 139 in model 177.053
- Unclip air ducting (4).
- Remove engine cover (1).
- Install in the reverse order.
When removing and installing the engine cover (1) always make sure that only the positions shown in the picture (arrows A) are used for pulling during removal or for pressing during installation. The ball heads (2) latch there into the ball mount receptacles (3). No force may be applied at any other points on the engine cover. The engine cover can get damaged if these instructions are not observed.