LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> GLA250 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Brakes -- Hydraulic & Mechanical System (1 Of 2) -- 118 Chassis) >> Testing & Repair >> Check Brake System For Leaks - AR42.10-P-0100-01MFA

Check Brake System For Leaks - AR42.10-P-0100-01MFA

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model 118, 177, 243, 247 

  1. Strongly press brake pedal several times after bleeding the brake system to ensure that the brakepads make contact with the brake disks.
  2. Operate brake pedal at approx. 200 to 300 N.

    IMPORTANT

    The pressure built up in the brake system must be held without it being possible to depress the brake pedal further.

  3. Check connection fittings and hose connections as well as all components on the brake system for leak tightness.

    If a leak is present.

    Replace the corresponding components of the brake system.