LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> GLA250 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Climate Control System -- 118 Chassis) >> Safety Precautions >> Risk Of Poisoning Caused By Inhaling Overheated Refrigerant Vapors From An Air Conditioning System Containing R134A. Risk Of Injury To Skin And Eyes Caused By Contact With Liquid R134A Refrigerant And When Working On Pressurized Parts - AS83.00-Z-0006-01A

Risk Of Poisoning Caused By Inhaling Overheated Refrigerant Vapors From An Air Conditioning System Containing R134A. Risk Of Injury To Skin And Eyes Caused By Contact With Liquid R134A Refrigerant And When Working On Pressurized Parts - AS83.00-Z-0006-01A

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.

Model All (4xWD, CAR, Light transporter, smart) 

Never perform welding work on or near a closed air conditioning system. No smoking or open flames. Wear safety glasses and protective gloves. Work only in well ventilated rooms. Carry out repair work on the air conditioning system circuit only after the system has been evacuated 

Potential risks 

Risk of poisoning 

Refrigerant can decompose when overheated. The resulting substances are toxic and should never be inhaled. Avoid contact with skin.

Risk of injury 

Compressed refrigerant is located in the A/C system lines and components. Even after the A/C system has been evacuated, overpressure may still be present when unfastening plug connections of the air conditioning system.

In closed air conditioning systems (filled or emptied), high overpressure can build up due to heating which can cause the system to burst. For this reason, all welding and soldering work  on or near closed air conditioning systems is prohibited.

Risk of injury to skin and eyes caused by contact with escaped refrigerant (frostbite injuries/icing). In the event of improperly conducted work on the refrigerant circuit, pressurized parts could present a mechanical hazard.

Refrigerant vapors are heavier than air; this means that escaping refrigerant poses a risk of suffocation for anyone in a work pit beneath the vehicle.

Contact with liquid refrigerant may cause frostbite-like damage to the skin (due to undercooling).

Health hazard 

Health hazard through inhalation of refrigerant vapors or swallowing of liquid refrigerant.

Safety instructions/precautions 

First-aid measures 

After eye contact: