LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> GLA250 Base >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Air Intake, Turbocharging -- 247 Chassis >> Testing & Repair >> Remove/Install Divert Air Switchover Valve >> Remove/Install Divert Air Switchover Valve - AR09.40-P-3000MFC

Remove/Install Divert Air Switchover Valve - AR09.40-P-3000MFC

Engine 260 in model 118, 177, 247 with code M016 (Uprated engine) 

Fig 1: Divert Air Switchover Valve Components Location - Engine 260 In Model 247 With Code M016
G16048351Courtesy of MERCEDES-BENZ USA
CAUTION Risk of injury  caused by scraping or cutting body parts on sharp vehicle parts Always wear protective gloves when working on or near sharp and non-deburred vehicle parts.
Deburr repair panels.
AS00.00-Z-0017-01A
Notice  Notes on avoiding damage through contamination and foreign objects   AH00.00-P-5000-01A
REMOVINGINSTALLING Remove/install     
1 Remove charge air cooler.   AR09.41-P-0105MFC 
2 Remove bolts (1). TORQUE SPECIFICATION Bolt, solenoid valve to charge air cooler *BA09.41-P-1001-01KOA 
3 Remove the overrun mode bypass air switchover valve (Y101) and seal the opening on the charge air cooler with suitable stop plugs. INSTALLATION IMPORTANT : Replace seal.  
    SPECIAL TOOL Set of plugs Fig 2
4 Install in the reverse order.    
CHARGE AIR PIPE/CHARGE AIR COOLING

Number Designation Engine 260.9
BA09.41-P-1001-01KOA Bolt, solenoid valve to charge air cooler Nm 8
Fig 2: Identifying Set Of Plugs (199 589 00 98 00)
G10781222Courtesy of MERCEDES-BENZ USA