Remove/Install Radial Shaft Sealing Ring Of Drive Shaft - AR35.30-P-4651MFC
Model 118, 177, 247 with engine 260, 282, 654
with code M005 (Vehicles with 4MATIC/all-wheel drive)
MODIFICATION NOTES
| 13.02.2020 | Rear axle differential filling capacity | Model 118 (except 118.353/354/653/654) Model 177 (except 177.053/054) Model 247 (except 247.753/754) | BF35.31-P-1001-02F |
| Risk of injury to skin and eyes due to handling of transmission oil. Health risk caused by swallowing transmission oil | Wear protective gloves, protective clothing and safety glasses. Do not pour transmission oil into beverage bottles. |
AS00.40-Z-0001-01A | |
| Notice | Notes on self-locking nuts and bolts | AH00.00-P-0001-01KOA | |
| Remove | |||
| 1 | Remove corresponding rear axle shaft. | AR35.30-P-0621MFC | |
| 2 | Pry radial shaft sealing ring (1) out of rear axle differential (2) using a suitable tool. | Do not damage the seat of the radial shaft sealing ring (1) in the rear axle differential (2). Leakage will otherwise occur. |
|
| 3 | Clean seat of radial shaft sealing ring (1) in rear axle differential (2). | Assembly cleaner | *BR00.45-Z-1028-04A |
| 4 | Check seat of radial shaft sealing ring (1) in rear axle differential (2) for damage. | If damage is found, ↓ Replace rear axle differential (2). |
AR35.31-P-0522MFC |
| Install | |||
| 5 | Press in radial shaft sealing ring (1) using drift (01) far enough so that drift (01) makes contact on rear axle differential (2). | Fig 2 | |
| Fig 1 | |||
| 6 | Moisten sealing lip of radial shaft sealing ring (1) with transmission oil. | ||
| Universal hypoid gear oils (specification 235.7) | BB00.40-P-0235-07A | ||
| 7 | Install corresponding rear axle shaft. | AR35.30-P-0621MFC | |
| 8 | Check and correct oil level in rear axle differential (2). | AR35.31-P-0520-08MFC | |
| *BF35.31-P-1001-02F | |||
| Sealant, Omnifit 100H (50 g) | *BR00.45-Z-1061-01A | ||
| Loctite 7063 (400 ml) cleaning spray | *BR00.45-Z-1046-04A | ||
| *BA35.31-P-1005-07A | |||
| 9 | Check rear axle differential (2) for leak tightness. |
REAR AXLE GEAR
| Number | Designation | Model 118 | Model 177 | |
|---|---|---|---|---|
| BA35.31-P-1005-07A | Filling screw/drain screw to housing cover at front/side | Nm | 35 | 35 |
REAR AXLE GEAR
| Number | Designation | Model 247 | |
|---|---|---|---|
| BA35.31-P-1005-07A | Filling screw/drain screw to housing cover at front/side | Nm | 35 |
REAR AXLE GEAR
| Number | Designation | Model 118 (except 118.353/354/653/65 4) Model 177 (except 177.053/054) Model 247 (except 247.753/754) | ||
|---|---|---|---|---|
| BF35.31-P-1001-02F | Rear axle differential filling capacity | Rear axle differential 150 | Liter | 0, 6 |
| Specified gear oils - overview | BB00.40-P-0231-01A | |||
| Approved axle gear oils | BB00.40-P-0235A | |||
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1028-04A | Assembly cleaner | A 000 986 56 01 |
| BR00.45-Z-1046-04A | Loctite 7063 (400 ml) cleaning spray | A 001 986 71 71 09 |
| BR00.45-Z-1061-01A | Sealant, Omnifit 100H (50 g) | A 002 989 23 71 |